The pair ofĀ Bogen CSD2X2 Drop-In Ceiling SpeakersĀ are easy-to-install 2 x 2′ ceiling tile speakers for use with 25/70V commercial PA audio systems. They easily install into a 2 x 2′ cut-out in your existing ceiling tile. A tile support rail is included for a precise fit in any drop ceiling. The 8″ cone speaker has a 10 oz magnet with a 70V/25V, 4-watt transformer.
Based on 0 reviews
Be the first to review “RDL FP-NML2 Network to Mic/Line Interface (without PoE)” Cancel reply
Related products
-
Pro Audio
Bogen CSD2X2VRU Drop-In Ceiling Mounted Speaker with Back Can (Pair, 70V/25V, Bright White)
Pro AudioBogen CSD2X2VRU Drop-In Ceiling Mounted Speaker with Back Can (Pair, 70V/25V, Bright White)
0 out of 5(0)Bogen CSD2X2Ā Overview
Steel protective back can protects exposed drivers at the rear of the speakerA recessed volume control is located on the front panelMulti-tap rotary switch with taps for 1/4 – 4W25/70V transformerPerforated grille on entire 2 x 1′ tileSKU: CSD2X2VRU999.00 د.إ -
Pro Audio
Pyle Pro PT649D Dual Cassette Player and Recorder
0 out of 5(0)Key Features- 2 Independent Tape Deck Slots
- LED Screen with Digital Counter
- Front-Panel Button Control Center
- Dynamic Interference Noise Reduction
- Auto Stop
- High-Speed Dubbing
- Includes RCA Cable and 2-Pin Amp Cable
SKU: PT649D999.00 د.إ -
Pro Audio
JBL LCT 81C/T Low-Profile Lay-In 2 x 2′ Ceiling Tile Loudspeaker (2-Pack, White)
0 out of 5(0)JBL LCT 81C/TĀ Overview
TheĀ JBL LCT 81C/TĀ full-range 2 x 2′ ceiling tile loudspeaker (2-pack) is well suited for a variety of applications including classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more. Designed for quick and easy installation, each tile is suspended in a ceiling grid with no cutting necessary. With a depth of only 4″, the LCT 81C/T fits into locations where deeper loudspeakers do not.
Each tile is fitted with a highly efficient 8″ dual-cone driver with a Kapton coil-former, which utilizes a high-temperature wire for better power dissipation and long-term reliability. The speaker’s built-in 10-watt transformer provides versatility by allowing use on 100 or 70V distributed loudspeaker lines as well as at 8 ohms (low impedance) for driving directly from a low-impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure. The speaker offers a frequency range of 100 Hz to 16 kHz, ensuring high speech intelligibility.
- Component: high-efficiency 8″ dual-cone driver
- Easy lay-in installation into 2 x 2′ US-style suspended gridĀ ceilings. No cutting of ceiling tiles is necessary
- Perforated metal grille included
- Combined 70V/100V and low-impedance direct operation
- 20W at 8 ohms (low-impedance) direct setting
- 10W multitap at 70V/100V with taps at 10W, 5W,Ā 2.5W (and 1.3W for 70V only)
- Very-low profile at just 4.1″ deep, to fit into ceilingsĀ that are shallow or that contain obstructions
- Easy bare-wire connection in protected compartment. WireĀ entrance from either top or side via knock-out
- Very-high 96 dB sensitivity turns power from small amplifiersĀ into maximum sound level for listeners
- Designed for high speech intelligibility
- 100° coverage pattern (conical)
- UL1480A and UL2043 certifications for use in ceiling plenumĀ spaces
SKU: LCT 81C/T1,299.00 د.إ
There are no reviews yet.