04 3550600
052 7036860
Network Switches & Routers
S5700-28P-LI-24S-4AH Huawei S5700 Series Switch
| Model: | S5700-28P-LI-24S-4AH Huawei S5700 Series Switch |
| Detail: |
S5700-28P-LI-24S-4AH(28 Gig SFP,4 of which are dual-purpose 10/100/1000 or SFP,with 1 battery of 4AH,AC 110/220V)
|
5,899.00 د.إ
S5700-28P-LI-24S Bundle(28 Gig SFP,4 of which are dual-purpose 10/100/1000 or SFP,with 1 battery of 4AH,AC 110/220V).
Quick Specs
Figure 1 shows the appearance of S5700-28P-LI-24S-4AH.
Table 1 shows the Quick Specs.
| Product Code | S5700-28P-LI-24S-4AH |
| Fixed Interfaces | 28xGE SFP ports, 4xCombo 10/100/1000Base-T Ethernet ports |
| Power Supply |
|
| Forwarding Performance | 42 Mpps |
| Switching Capacity | 256 Gbit/s |
| power consumption | <34.1W |
| Dimensions (W x D x H) | 442 mm x 310 mm x 43.6 mm |
The Modules
Table 2 shows the recommended elements for the S5700-28P-LI-24S-4AH.
| Model | Description |
| GE-SFP Optical Transceiver | |
| eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
| SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
| S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
| S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
| GE Copper Transceiver | |
| SFP-10G-USR | Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
| Lithium Battery Module | |
| BAT-8AHA | Huawei BAT-8AHA Rechargeable Battery for S5700 |
| BAT-4AHA
|
Huawei BAT-4AHA BAT-4AHA Lithium ion battery unit for S5700 |
Compare to Similar Items
Table 3 shows the comparison of S5700-28P-LI-24S-4AH and S5700-28P-LI-4AH.
| Product Code | S5700-28P-LI-24S-4AH | S5700-28P-LI-4AH |
| Fixed Interfaces | 28xGE SFP ports, 4xCombo 10/100/1000Base-T Ethernet ports | 24×10/100/1000Base-T Ethernet ports, 4xGE SFP ports |
| Power Supply | AC power supply: One 4AH lithium battery is fixed in the battery slot which can be used for 8AH lithium battery or external lead-acid battery used in the event of a mains power failure, or a 150 W AC or DC power module used as the redundant power source |
AC power supply One 4AH lithium battery is fixed in the battery slot which can be used for 8AH lithium battery or external lead-acid battery used in the event of a mains power failure, or a 150 W AC or DC power module used as the redundant power source |
| Forwarding Performance | 42 Mpps | 42 Mpps |
| Switching Capacity | 256 Gbit/s | 256 Gbps |
| power consumption | <34.1W | <23W |
| Dimensions (W x D x H) | 442 mm x 310 mm x 43.6 mm | 442 mm x 310 mm x 43.6 mm |
S5700-28P-LI-24S-4AH Specification |
|
| Fixed port | 24 × 10/100/1000Base-T, 4 × 1000Base-X SFP |
| MAC address table | IEEE 802.1d compliance |
| MAC address learning and aging | |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| MAC address entries: 16K | |
| VLAN | 4K VLANs
Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
| Ring protection | RRPP ring topology and RRPP multi-instance |
| Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
| SEP | |
| ERPS(G.8032) | |
| STP, RSTP, and MSTP | |
| BPDU protection, root protection, and loop protection | |
| BPDU Tunnel | |
| Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
| ITU-Y.1731 | |
| DLDP | |
| LACP | |
| MPLS features | MPLS L3VPN |
| MPLS L2VPN(VPWS/VPLS) | |
| MPLS-TE | |
| MPLS QoS | |
| IP routing | Static routing |
| IPv6 features | Neighbor Discovery (ND) |
| Path MTU (PMTU) | |
| IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
| MLD v1/v2 snooping | |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
| Multicast forwarding in a VLAN and multicast replication between VLANs | |
| Multicast load balancing among member ports of a trunk | |
| Controllable multicast | |
| Port-based multicast traffic statistics | |
| QoS/ACL | Rate limiting on packets sent and received by an interface |
| Packet redirection | |
| Port-based traffic policing and two-rate three-color CAR | |
| Eight queues on each port | |
| WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
| Re-marking of the 802.1p priority and DSCP priority | |
| Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID | |
| Rate limiting in each queue and traffic shaping on ports | |
| Security | User privilege management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense | |
| Binding of the IP address, MAC address, interface, and VLAN | |
| Port isolation, port security, and sticky MAC | |
| MFF | |
| Blackhole MAC address entries | |
| Limit on the number of learned MAC addresses | |
| 802.1x authentication and limit on the number of users on an interface | |
| AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
| SSH v2.0 | |
| Hypertext Transfer Protocol Secure (HTTPS) | |
| CPU defense | |
| Blacklist and whitelist | |
| Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
| Management and maintenance | Virtual cable test |
| Port mirroring and RSPAN (remote port mirroring) | |
| Remote configuration and maintenance using Telnet | |
| SNMP v1/v2c/v3 | |
| RMON | |
| Web NMS | |
| HGMP | |
| System logs and alarms of different levels | |
| 802.3az EEE | |
| Dying gasp | |
| sFlow | |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Supports LNP (Similar to DTP) | |
| Supports VCMP (Similar to VTP) | |
| Operating environment | Operating temperature: 0℃–50℃ |
| Relative humidity: 10%–90% (non-condensing) | |
| Input voltage | AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
| DC:
Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V DC Note: PoE-support switches do not use DC power supplies. |
|
| Dimensions (W x D x H) | 442 x 310 x 43.6 mm |
| Powerconsumption | <34.1W |
There are no reviews yet.