Seagate 650GB IDE ATA/100 Hard Drive ST3650640A
Capacity: 650GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5″)
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 78
Average Seek Time (read/write ms): 11 / 12
Electrical Interface Speed: EIDE / Ultra ATA/100 – 100MBps
On-Board Cache: 16MB
The Seagate Barracuda 7200.10 desktop hard drive features innovative perpendicular recording technology and is the first drive on the market to provide capacities up to 750 GB. Barracuda 7200.10 hard drives deliver superb performance, efficiency, speed and durability for all your application needs.
- Perpendicular recording technology for maximum drive capacity and reliability
- 16-MB cache buffer
- Ultra-fast performance
- Superb reliability
- Whisper-quiet operation
- Enhanced G-Force Protection against handling damage
Drive specification
ST3650640A
Formatted Gbytes (512 bytes/sector)*
650
Recording density in BPI (bits/inch max)
926,000
Track density TPI (tracks/inch avg)
145,000
Areal density (Mbits/inch avg)
128,200
Spindle speed (RPM)
7,200
Internal data transfer rate (Mbytes/sec max)
1,030
Sustained transfer rate OD (Mbytes/sec)
78
I/O data transfer rate (Mbytes/sec max)
100
ATA data-transfer modes supported
PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5
Cache buffer
16 Mbytes
Height (max)
26.11 mm (1.028 inches)
Width (max)
101.85 mm (4.010 inches)
Length (max)
146.99 mm (5.787 inches)
Weight (max) grams
720
Average latency (msec)
4.16
Power-on to ready (typical)
15 sec
Standby to ready (typical)
15 sec
Track-to-track seek time (msec typical)
0.8 (read), 1.0 (write)
Average seek, read (msec typical)
11.0
Average seek, write (msec typical)
12.0
Startup current (typical) 12V (peak)
2.8 amps
Seek power (typical) watts
9.9
Operating power (typical) watts
9.2
Idle mode (typical) watts
7.2
Standby mode (typical) watts
1.2
Sleep mode
1.2
Voltage tolerance (including noise)
5V ± 5%
12V ± 10%Ambient temperature
0° to 60°C (op.)
–40° to 70°C (nonop.)
There are no reviews yet.