Seagate Momentus 7200 FDE.2 ST9250414ASG SATA G-Force Hard Disk Drive
Capacity: 250GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 2.5″x9mm (Fits in ALL laptops)
Sustained Throughput (MBps):Ā
Average Seek Time (read/write ms): 11 / 13
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 16MB
Seagate Momentus 7200 FDE.2 ST9250414ASG 250GB 7.2K 2.5″ SATA G-Force Hard Disk Drive – Refurbished OEM
These drives provide the following key features:
- DriveTrust technology including:
- Hardware-based Full Disc Encryption (FDE)
- DriveTrust security interface and ATA security interface
- Integrates with standard security software packages to provide features such as: Pre-boot authentication and initialization using the driveās secure partition and DriveTrust API
- Encryption key escrow.
- 7,200-RPM spindle speed
- Free Fall Protection on ST9500426ASG, ST9320427ASG, ST9320426ASG, ST9250464ASG, ST9250414ASG, ST9160419ASG and ST9160418ASG models only.
- The following models are in-process for FIPS 140-2 validation (Certification Pending):ST9500422AS, ST9320427ASG, ST9250414ASG, ST9250412AS and ST9160419ASG.
- Quiet operation. Fluid Dynamic Bearing (FDB) motor.
- High instantaneous (burst) data transfer rates (up to 3 Gbits/sec).
- State-of-the-art cache and on-the-fly error-correction algorithms.
- Native Command Queuing (NCQ) with command ordering.
- Full-track multiple-sector transfer capability without local processor intervention.
- 1,000 Gs nonoperating shock and 350 Gs operating shock.
- SeaTools⢠diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
- Support for S.M.A.R.T. drive monitoring and reporting.
- Support for Read Multiple and Write Multiple commands.
The Free Fall Protection feature provides enhanced data protection against shock events that may occur while the drive is operating. This feature is designed to decrease the likelihood of data loss by detecting a free fall event and unloading the actuator before a shock takes place in falls of >8 inches (nominal). The drive uses a 0G sensor mounted on the printed circuit board assembly (PCBA) to sense this event.
Dell Part Number:Ā 8NW5P 08NW5P
Ā
Drive specification | ST9500426ASG ST9500422AS ST9500421AS |
ST9320427ASG ST9320426ASG ST9320426AS |
ST9250464ASG ST9250414ASG ST9250412AS ST9250411AS |
ST9160419ASG ST9160418ASG ST9160413AS |
---|---|---|---|---|
Formatted Gbytes (512 bytes/sector)* | 500 | 320 | 250 | 160 |
Guaranteed sectors | 976,773,168 | 625,142,448 | 488,397,168 | 312,581,808 |
Bytes per sector | 512 | |||
Physical read/write heads | 4 | 3/4 | 2 | |
Discs | 2 | 1 | ||
Cache (Mbytes) | 16 | |||
Recording density in BPI (bits/inch max) | 1,490k | |||
Track density TPI (tracks/inch max) | 265k | |||
Areal density (Gbits/inch max) | 394 | |||
Spindle speed (RPM) | 7.2 | |||
Internal transfer rate (Gbits/sec max) | 1.23 | |||
I/O data transfer rate (Gbits/sec max) | 3 | |||
ATA data-transfer modes supported | SATA 1.5/3.0, Serial ATA Revision 2.6Ā PIO modes 0ā4 Multiword DMA modes 0ā2 Ultra DMA modes 0ā6 |
|||
Height (max) | 9.4 +/- 0.2 mm (0.371 +/- .008 inches) | |||
idth (max) 69.85 +/- .25 mm (2.750 +/- .010 inches) | Ā | |||
Length (max) | 100.35 +0.20 / -0.25 mm (3.951 +.008 / -.010 inches) | |||
Weight (typical) | 110 grams (0.238 lb)Ā | 105 grams (0.227 lb) | ||
Average latency (msec) | 4.17 | |||
Power-on to ready (sec typical) | 4.5 | |||
Standby to ready (sec typical) | 3 | |||
Track-to-track seek time, read (msec typical) | 1.5 | |||
Average seek, read (msec typical) | 11 | |||
Average seek, write (msec typical) | 13 | |||
Startup current, +5V (max) | Ā 1.0 amps |
There are no reviews yet.