,

Seagate Momentus 7200 FDE.2 ST9250414ASG 250GB 7.2K 2.5″ SATA G-Force Hard Disk Drive

Availability:

30 in stock


1,009.00 د.إ

30 in stock

Seagate Momentus 7200 FDE.2 ST9250414ASG SATA G-Force Hard Disk Drive

Capacity: 250GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 2.5″x9mm (Fits in ALL laptops)
Sustained Throughput (MBps):Ā 
Average Seek Time (read/write ms): 11 / 13
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 16MB

Seagate Momentus 7200 FDE.2 ST9250414ASG 250GB 7.2K 2.5″ SATA G-Force Hard Disk Drive – Refurbished OEM

These drives provide the following key features:

  • DriveTrust technology including:
  • Hardware-based Full Disc Encryption (FDE)
  • DriveTrust security interface and ATA security interface
  • Integrates with standard security software packages to provide features such as: Pre-boot authentication and initialization using the drive’s secure partition and DriveTrust API
  • Encryption key escrow.
  • 7,200-RPM spindle speed
  • Free Fall Protection on ST9500426ASG, ST9320427ASG, ST9320426ASG, ST9250464ASG, ST9250414ASG, ST9160419ASG and ST9160418ASG models only.
  • The following models are in-process for FIPS 140-2 validation (Certification Pending):ST9500422AS, ST9320427ASG, ST9250414ASG, ST9250412AS and ST9160419ASG.
  • Quiet operation. Fluid Dynamic Bearing (FDB) motor.
  • High instantaneous (burst) data transfer rates (up to 3 Gbits/sec).
  • State-of-the-art cache and on-the-fly error-correction algorithms.
  • Native Command Queuing (NCQ) with command ordering.
  • Full-track multiple-sector transfer capability without local processor intervention.
  • 1,000 Gs nonoperating shock and 350 Gs operating shock.
  • SeaToolsā„¢ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
  • Support for S.M.A.R.T. drive monitoring and reporting.
  • Support for Read Multiple and Write Multiple commands.

The Free Fall Protection feature provides enhanced data protection against shock events that may occur while the drive is operating. This feature is designed to decrease the likelihood of data loss by detecting a free fall event and unloading the actuator before a shock takes place in falls of >8 inches (nominal). The drive uses a 0G sensor mounted on the printed circuit board assembly (PCBA) to sense this event.

Dell Part Number:Ā 8NW5P 08NW5P

Ā 

Drive specification ST9500426ASG
ST9500422AS
ST9500421AS
ST9320427ASG
ST9320426ASG
ST9320426AS
ST9250464ASG
ST9250414ASG
ST9250412AS
ST9250411AS
ST9160419ASG
ST9160418ASG
ST9160413AS
Formatted Gbytes (512 bytes/sector)* 500 320 250 160
Guaranteed sectors 976,773,168 625,142,448 488,397,168 312,581,808
Bytes per sector 512
Physical read/write heads 4 3/4 2
Discs 2 1
Cache (Mbytes) 16
Recording density in BPI (bits/inch max) 1,490k
Track density TPI (tracks/inch max) 265k
Areal density (Gbits/inch max) 394
Spindle speed (RPM) 7.2
Internal transfer rate (Gbits/sec max) 1.23
I/O data transfer rate (Gbits/sec max) 3
ATA data-transfer modes supported SATA 1.5/3.0, Serial ATA Revision 2.6Ā 
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Height (max) 9.4 +/- 0.2 mm (0.371 +/- .008 inches)
idth (max) 69.85 +/- .25 mm (2.750 +/- .010 inches) Ā 
Length (max) 100.35 +0.20 / -0.25 mm (3.951 +.008 / -.010 inches)
Weight (typical) 110 grams (0.238 lb)Ā  105 grams (0.227 lb)
Average latency (msec) 4.17
Power-on to ready (sec typical) 4.5
Standby to ready (sec typical) 3
Track-to-track seek time, read (msec typical) 1.5
Average seek, read (msec typical) 11
Average seek, write (msec typical) 13
Startup current, +5V (max) Ā 1.0 amps

 

Weight 0.59 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Seagate Momentus 7200 FDE.2 ST9250414ASG 250GB 7.2K 2.5″ SATA G-Force Hard Disk Drive”

There are no reviews yet.