TheĀ Shinybow 16 x 16 HDMI Matrix Routing Switcher with Full EDID Management / LearningĀ is designed for multiple sources and displays features 16 HDMI connections for inputs and 16 HDMI connections for outputs located on the back panel. The unit has EDID management and EDID memory, including the Fast Speed Start feature. This feature permits switching between HDMI sources in as little as 2 seconds.
The switcher supports Ultra HD (3840×2160), 1080p, and 3D formats, and 36-bit Deep Color formats. The front panel includes a large LCD that shows current routing stations of all inputs to outputs, and allows for easy setup of EDID modes. Functional manual control is achieved through push buttons located on the front panel. External functional control is achieved through an RS-232 connection, IR remote control, or IP.
The RS-232 connection allows functions to be controlled by systems such as Control4 (drivers included) or any computerized software / hardware control system. The IP port supports serial commands from any device when using the included software that redirects COM ports to an IP address set in the switcher. The IP port has a built in Web server.
One-to-many or many-to-one connections can be established using the matrix routing switcher. You can easily connect any input device to any output device. You can also establish a single input device to many output devices, eliminating the need to constantly re-route video input and output cables.
- 16 x HDMI inputs, 16 x HDMI outputs
- HDMI V1.4a and HDCP 2.2 compliant
- HDMI sources can be routed independently to displays
- Video bandwidth up to 6.75 Gb/s
- Wide range of HD resolutions from PC XGA to WUXGA 1920×1200, and HDTV / DTV resolutions 480i/480p, 576i/576p, 720p, 1080i, 1080p, and Ultra HD (3840×2160)
- Digital Video TMDS formats resolution up to 1080p60 with Deep Color 36-bit
- Digital Audio Support: Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX- PCM, PCM2, and LPCM2
- Supports EDID for total control of compliant displays AUTO mode and FIX mode
- Switching controlled via the front panel, RS-232, and IR
- EDID configuration via internal modes
- External EDID learning mode (learning destination EDID link to source device)
- Easy to install as either desktop or on the provided rack mount brackets (Rack mountable; 2U high with 19″ rack ears)
There are no reviews yet.