TheĀ Sonifex AVN-DIO03Ā is a Dante AoIP network-to-headphones converter featuring a single stereo headphone output available on two connections: 1/4″ and 3.5mm jacks. It also has volume control for the headphones. A limiter with a threshold setting and LED indication can be switched on to prevent overshooting and to protect hearing. The front-panel potentiometer adjusts headphone volume from mute to +6 dB of gain. This is useful if the Dante stream level is low and requires boosting.
Sonifex AVN-DIO03 Dante to Headphones Converter
- Dante AoIP to Headphones Converter
- Stereo Headphone Output on 2 Connections
- 1/4″ and 3.5mm Jacks
- Volume Control; Limiter with Threshold
AED3,199.00
Based on 0 reviews
Be the first to review “Sonifex AVN-DIO03 Dante to Headphones Converter” Cancel reply
Related products
-
Pro Audio
Pyle Pro PT649D Dual Cassette Player and Recorder
0 out of 5(0)Key Features- 2 Independent Tape Deck Slots
- LED Screen with Digital Counter
- Front-Panel Button Control Center
- Dynamic Interference Noise Reduction
- Auto Stop
- High-Speed Dubbing
- Includes RCA Cable and 2-Pin Amp Cable
SKU: PT649DAED999.00 -
Pro Audio
JBL LCT 81C/T Low-Profile Lay-In 2 x 2′ Ceiling Tile Loudspeaker (2-Pack, White)
0 out of 5(0)JBL LCT 81C/TĀ Overview
TheĀ JBL LCT 81C/TĀ full-range 2 x 2′ ceiling tile loudspeaker (2-pack) is well suited for a variety of applications including classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more. Designed for quick and easy installation, each tile is suspended in a ceiling grid with no cutting necessary. With a depth of only 4″, the LCT 81C/T fits into locations where deeper loudspeakers do not.
Each tile is fitted with a highly efficient 8″ dual-cone driver with a Kapton coil-former, which utilizes a high-temperature wire for better power dissipation and long-term reliability. The speaker’s built-in 10-watt transformer provides versatility by allowing use on 100 or 70V distributed loudspeaker lines as well as at 8 ohms (low impedance) for driving directly from a low-impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure. The speaker offers a frequency range of 100 Hz to 16 kHz, ensuring high speech intelligibility.
- Component: high-efficiency 8″ dual-cone driver
- Easy lay-in installation into 2 x 2′ US-style suspended gridĀ ceilings. No cutting of ceiling tiles is necessary
- Perforated metal grille included
- Combined 70V/100V and low-impedance direct operation
- 20W at 8 ohms (low-impedance) direct setting
- 10W multitap at 70V/100V with taps at 10W, 5W,Ā 2.5W (and 1.3W for 70V only)
- Very-low profile at just 4.1″ deep, to fit into ceilingsĀ that are shallow or that contain obstructions
- Easy bare-wire connection in protected compartment. WireĀ entrance from either top or side via knock-out
- Very-high 96 dB sensitivity turns power from small amplifiersĀ into maximum sound level for listeners
- Designed for high speech intelligibility
- 100° coverage pattern (conical)
- UL1480A and UL2043 certifications for use in ceiling plenumĀ spaces
SKU: LCT 81C/TAED1,299.00 -
Pro Audio
DPA Microphones 4018FGT Supercardioid Microphone with Twin 120cm Floor Boom Stand
0 out of 5(0)Key Features- Supercardioid Capsule
- 20 Hz to 20 kHz Frequency Response
- 48V Phantom Power
- For Musical Instruments
- Excellent for Speech
- Low Distortion
- Hugh Dynamic Range
- Twin 120cm Floor Boom Stand Included
SKU: 4018-DF-F-B01-120TAED23,799.00
There are no reviews yet.