No products in the cart.
04 3550600
052 7036860
Cameras, Multimedia Devices
Sony HXC-P70 Affordable, three 2/3-inch Exmor CMOS sensor, full HD/SD compact system camera with direct optical fiber cable connection HXC-P70
د.إ79,999.00
Affordable, three 2/3-inch Exmor CMOS sensor, full HD/SD compact system camera with direct optical fiber cable connection
Compact, lightweight “POV” camera with lower power consumption, plus optical fiber connections
The HXC-P70 is a point-of-view “POV” camera developed for a wide range of more affordable applications than the HDC-P1, thanks to a longer cable distance extension and a higher sensitivity, in addition to its compact size, light weight and lower power consumption.
The HXC-P70 allows direct connection to the HXCU-FB70 camera control unit by optical fiber cable, in addition to two HD/SD-SDI outputs. The hybrid type fiber cable can extend the distance from the CCU up to 500 m, while supplying the required power. If a single-mode fiber cable is connected, the distance can extend up to 10 km with a local power supply.
The HXC-P70 adopts the same three 2.2-million pixels 2/3-inch type CMOS sensors as used on Sony high end camera such as the HXC-D70 and delivers high sensitivity of F12 at 59.94Hz or F13 at 50Hz. In addition, the camera uses an electrical CC filter alongside a servo motorized optical ND filter. These help to reduce the power consumption and make for an affordable total system with the CCU, cables, and remote controller. The camera is ideal for a wide variety of applications, from production studio and event hall/stadium work, to wider applications such as surveillance, conference and house of worship installations.
High sensitivity and low noise
Incorporates high quality three 2/3-inch Exmor CMOS sensors, plus integrated motorized ND Filter and electrical CC filter.
Optical fiber transmission with direct cable connection
Up to 500m by the hybrid type optical fiber cable with power supply and up to 10km by the single-mode fiber cable with local power supply.
HXCU-FB70 Camera Control Unit
Connects to the HXCU-FB70 for precise remote control.
Features
Superb three 2/3-inch-type CMOS sensors
Keeping the same compact and lightweight body as the HDC-P1, the HXC-P70 achieves a cost reduction while providing the high picture quality equivalent to the reputable HXC-D70 HD/SD system camera by using the same image sensor. It achieves high sensitivity of F12 (at 1080/59.94i) or F13 (at 1080/50i) while keeping low noise ratio.
Integrated ND filter / Electrical CC filter, and TLCS
The HXC-P70 is equipped with a Neutral Density (ND) optical servo filter unit and electrical Color Correction (CC) filter. The electrical CC filter can be controlled from the remote control panel, which allows you to assign with four different color temperatures. In addition to the filter functions, thanks to the TLCS (Total Level Control System) function, gain/iris/shutter is automatically controlled by the ambient brightness, making it very efficient for nature shooting or surveillance use from morning to night.
Expandable operability with HXCU-FB70
Connecting the HXC-P70 with the HXCU-FB70 optical fiber camera control unit (CCU) enables precise remote control in picture adjustment and color matching of cameras, while also monitoring the SDI output signal.
Long-distance transmission up to 10 km
The hybrid type optical fiber cable can extend the distance from the HXCU-FB70 camera control unit up to 500 m while supplying the required power. In the case of connection with a single-mode fiber cable (SMF), it can extend up to 10 km, if you are using a local power supply. Using the SMF already laid as infrastructure in many facilities enables you to install the camera system quickly and easily.
Beneficial digital extender by 2x or 4x
The digital extender function expands the size of the image by a factor of two or four times in the center of the image sensor’s captured image. This function works without a decrease in sensitivity, such as an F-number drop, which typically occurs when using conventional optical extender functions.
Power Requirements
CCU: DC48V, 1.7A (max.)
Ext.DC In: DC12V, 3.6A (max.)
Ext.DC In: DC12V, 3.6A (max.)
Power Consumption
17W
Operating Temperature
-10°C to +45°C
14°F to +113°F
14°F to +113°F
Storage Temperature
-20°C to +60°C
-4°F to +140°F
-4°F to +140°F
Dimensions (W x H x D) *[1]
86 x 130 x 210 mm
3 1/2 x 5 1/8 x 8 3/8 inches
3 1/2 x 5 1/8 x 8 3/8 inches
Mass
Approx. 1.5 kg
Approx. 3 lb 4 oz
Approx. 3 lb 4 oz
Pickup Device
3-chip 2/3-inch type CMOS
Effective Picture Elements
1920 x 1080 (H x V)
Signal Format
HD: 1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
SD: 480/59.94i, 576/50i
Spectrum System
F1.4 prism system
Lens Mount
Sony 2/3-inch type bayonet mount
Built-in Filters
CC: Electrical
ND: 1; CLEAR, 2; 1/4ND, 3; 1/16ND, 4; 1/64ND
ND: 1; CLEAR, 2; 1/4ND, 3; 1/16ND, 4; 1/64ND
Sensitivity (at 2000 lx, 3200K, 89.9% reflectance)
F12 (59.94 Hz), F13 (50 Hz)
Signal-to-noise Ratio
Typical 60dB *[2] (1080/59.94i)
Modulation Depth
HD : 45% or higher at 27.5 MHz (1080i)
Horizontal Resolution
1,000 TV lines or higher
Shutter Speed
1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i mode)
Shutter Speed (Slow Shutter (SLS))
2, 3, 4, 5, 6, 7, 8, 16, 32, 64-frame accumulation (Only for HD1080 mode)
Mic Input
-60dBu to -20dBu, Balance, via D-Sub 9pin, female (x1)
DC Input
XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC Output
DC 10.5 V to 17 V, 1.5 A (max.) via D-Sub 9pin
SDI Output
BNC (x2) HD-SDI or SD-SDI selectable
CCU
Optical Fiber (x1), for Single Mode Fiber Cable
Distance of Power Supply (with HXCU-FB70)
500m (max.)
by CCFN Sony Hybrid Type Fiber Cable with Portable Lens Installed
by CCFN Sony Hybrid Type Fiber Cable with Portable Lens Installed
Distance of Fiber Cable (with HXCU-FB70)
10km (max.)
by Single Mode Fiber Cable with Local Power Supply
by Single Mode Fiber Cable with Local Power Supply
Remote
8pin (x1)
RJ-45 (x1), Ether 10BASE-T, 100BASE-TX
RJ-45 (x1), Ether 10BASE-T, 100BASE-TX
Lens
12-pin (x1)
USB
USB 2.0 (x1)
EXT Input/Output
D-Sub 9pin, female (x1)
Supplied Accessories
Tally Number Plate (1 set)
Operation Guide (1)
Operation Manual (CD-ROM 1)
Operation Guide (1)
Operation Manual (CD-ROM 1)
There are no reviews yet.