04 3550600 052 7036860

Toa Electronics DP-SP3 2-In/6-Out Digital Speaker System Processor

Add to Wishlist
Key Features
  • Equalizer and TOA Speaker EQ Library
  • Digital Crossover System and Matrix
  • Compressor and Delay
  • Input Pad
  • Analog Output Attenuator
  • Output Mute Control
  • Contact Input Terminals
  • PC Software Control Over LAN
  • 24-bit 96 kHz Resolution
  • 10 Filters/Input, 12 Filters/Output

7,899.00 د.إ

Add to Wishlist

Toa Electronics DP-SP3Ā Overview

TheĀ TOA Electronics DP-SP3 2-In/6-Out Digital Speaker System ProcessorĀ is a 1RU rackmountable signal processor designed for 3-way multi-amp systems in venues, banquet halls, houses of worships, restaurants, gymnasiums, and more. It features an equalizer, crossover, digital matrix, compressor, and delay. It also features an input pad, an analog output attenuator, an output mute control, front panel LED metering, 16 re-callable presets, an EQ characteristic library for optimization of TOA speakers, and contact input terminals. The unit includes a CAT5 connection for software control from a PC over a local area network.

The unit features 24-bit 96 kHz sampling resolution, 10 filters on each input, and 12 filters on each output for any combination of high/low shelving filters, all-pass, notch filters, CD horn equalizers, high/low pass filters, or parametric equalizer. It includes four contact input terminals for output volume control, output muting, and memory recall. The unit comes with a power cord, eight 3P removable terminal plugs, one 5P removable terminal plug, and a CD-ROM containing software for Windows.

SKU: DP-SP3 CU Category: Tag:
Frequency Response
20 to 20,000 Hz Ā±1 dB
Sampling Frequency
96 kHz
Dynamic Range
110 dB or more
Distortion
0.03% or less 1 kHz, +4 dB+ input/output, 20 to 20,000 Hz BPF
Crosstalk
-80 dB or less, 1 kHz
Input
2x channels, +4 dB+ (max +24 dB+), 10 kĪ©, electronically-balanced, removable terminal block (3P)
Output
6x channels, +4 dB+ (max +24 dB+), applicable load 600 Ī© or more, electronically-balanced, removable terminal block (3P)
A/D Converter
24-bits
D/A Converter
24-bits
Preset
16
Signal Processing
Equalizer
Parametric Equalizer: 20 to 20,000 Hz: Ā±15 dB, Q: 0.267 to 69.249
Filter:
High-Pass Filter: 20 to 20,000 Hz: 6 dB/oct, 12 dB/oct
Low-Pass Filter: 20 to 20,000 Hz: 6 dB/oct, 12 dB/oct
Notch Filter: 20 to 20,000 Hz: Q: 8.651 to 69.249
All-Pass Filter: 20 to 20,000 Hz: Q: 0.267 to 69.249
High-Shelving Filter: 5 to 20,000 Hz: Ā±15 dB
Low-Shelving Filter: 20 to 500 Hz: Ā±15 dB
Horn Equalizer: 20 kHz, 0 to 18 dB in 0.5 dB steps
Crossover
2 ways, 3 ways, 4 ways
Crossover Filter: 20 to 20,000 Hz, 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct
-15 to +12 dB, polarity switchable
Delay: 0 to 170.656 ms in 0.01 ms steps
Compressor
Threshold: -20 to +20 dB in 1 dB steps
Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 7:1, 8:1, 10:1, 12:1, 20:1, āˆž:1
Attack time: 0.2 ms to 5 s
Release time: 10 ms to 5 s
Delay
0 to 682.656 ms in 0.01 ms steps
Matrix Type
2 x 6
Crosspoint Mixing Modes
-āˆž to 0 dB in 1 dB steps
Function
Input PAD (-14 dB) control, analog output attenuator
(-āˆž to 0 dB in 1 dB steps) control, EQ characteristic library for TOA speakers, input/output level indicator (4-point LED indicator), output MUTE switch x6
Contact
Input: 4 channels, open voltage: 5 VDC, short-circuit current: 5 mA, removable terminal block (5 P)
Control Function: Preset memory selection, volume control, and mute
Network
Network 1/F: 1 channel of 10BASE-T/100BASE-TX (auto-negotiation)
RJ45 connector, connection via switching hub
Network Protocol: TCP/IP
Connection Cable: Shielded Cat 5 or higher twisted pair cable for LAN (Cat. 5-STP or better)
Maximum Cable Length: 100 m (109.36 yd) (between DP-SP3 and switching hub)
Operating Temperature
32 to 104Ā°F (0 to +40Ā° C)
Operating Humidity
90% RHS (no condensation)
Finish
Panel: Aluminum, hairline, back
Case: Surface-treated steel plate
Power Source
100 to 120 VAC at 60 Hz
Power Consumption
25 W
Requirements
CPU: Pentium 4, 1.0 GHz or faster
Memory: Windows XP – 512 MB or more, other OS – 1.0 GB or more
Display: 1024 x 768 resolution or higher
Free Hard Disk Space: 16 MB or more, however 600 MB or more is required for the 32-bit version or 1.5 GB or more for 64-bit version when *.NET framework* is not yet installed

Optical Drive: CD-ROM drive
Network Adapter: 10BASE-T or faster connection

Windows XP Service Pack 3 or later, Windows Vista (32/64-bit) Service Pack 1 or later, Windows 7 (32/64-bit)

Required Component: .NET Framework 4 Client Profile
Dimensions
18.98 x 1.73 x 11.38″ (482 x 44 x 289 mm)
Weight
6.83 lb (3.10 kg)
Packaging Info
Package Weight
10 lb
Box Dimensions (LxWxH)
22.441 x 18.819 x 3.543″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Toa Electronics DP-SP3 2-In/6-Out Digital Speaker System Processor”

There are no reviews yet.

Related products