04 3550600 052 7036860

Tripp Lite BCPERS450 450VA Standby UPS Tower Battery Backup

Add to Wishlist

Interface Types: IEC 5-15P

Electrical Interface: USB 1.1 – 11Mbps

Bays/Ports/Slots: 3

U Height: 2U

Wattage/VA: 280W

Voltage: 110-120V

699.00 د.إ

Add to Wishlist

Tripp Lite BC Personal BCPERS450 120V 450VA 280W Standby UPS Tower Battery Backup – Brand New

Tripp Lite BC Personal BCPERS450 120V / 120 Volts 450VA / 450 Volt-Amps 280W / 280 Watts Standby UPS / Uninterruptible Power Supply Tower Battery Backup with 3 built-in NEMA 5-15R supported outlets – Brand New

BC Personal 120V 450VA 280W Standby UPS, Tower, USB port, 3 Outlets

  • 450VA tower 120V standby UPS
  • Maintains AC output during power failures
  • USB port, Status LEDs
  • NEMA 5-15P input plug and 3 NEMA 5-15R outlets
  • 2-year limited warranty
  • $100,000 Ultimate Lifetime Insurance

 

Overview
Tripp Lite’s BCPERS450 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety of consumer and professional electronics. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge suppression prevents connected equipment damage. USB communications port supports built-in power management and auto-shutdown features of Windows and Mac OS X or full featured monitoring and data-saving auto-shutdown options using Tripp Lite’s free PowerAlert monitoring software.

Features

  • BCPERS450 small tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges
  • 450VA / 280 watt UPS output capacity
  • Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss and system downtime for connected equipment
  • Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert
  • HID-compliant USB port also enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • 4.6 minutes runtime at 100% load (280 watts), 15 minutes runtime at 50% load (140 watts)
  • 30 minutes runtime for a desktop computer system consuming 80 watts continuous
  • 3 built-in NEMA 5-15R UPS supported outlets
  • NEMA 5-15P input connection with 6ft / 1.8m line cord
  • Network grade AC surge and lightning protection is available from all outlets
  • Supports Tripp Lite’s Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment, ideal for unattended kiosk applications
  • Front panel LEDs indicate line / battery mode and battery replace status; Audible alarm with alarm cancel / self-test button
  • Hot swappable user battery replacement Optional PDUB15 bypass PDU enable hot-swappable UPS replacement with no disruption to connected equipment
  • Small tower housing supports desk or floor placement

 

Package Includes

  • BCPERS450 UPS System
  • Instruction manual
SKU: BCPERS450 Category:
TRIPP LITE UPS BATTERY BACKUP
Model Number BCPERS450
OVERVIEW
UPS Type Standby
OUTPUT
Output Volt Amp Capacity (VA) 450
Output Watt Capacity (Watts) 280
Nominal Voltage Details 115v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Battery Mode) +/-5%)
Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
Nominal Output Voltage(s) Supported
  • 110V
  • 115V
  • 120V
Output Receptacles (3) 5-15R
Individually Controllable Load Banks

Select UPS models have their receptacles divided into one or more load banks (labeled LOAD 1, ect.) which may be remotely switched OFF and ON using Tripp Lite UPS software without interrupting power to equipment connected to the other outlets

 No
INPUT
Rated input current (Maximum Load) 3.1A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
UPS Input Cord Length (ft.) 6
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.)

The amount of runtime th UPS will offer when you

 4.6 min. (280w)
Half Load Runtime (min.)

The amount of runtime th UPS will offer when you

 15 min. (140w)
DC System Voltage (VDC) 12
Battery Recharge Rate (Included Batteries) Less than 3.6 hours from 10% to 90%
Internal UPS Replacement Battery Cartridge RBC51
Battery Access Battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation
  • Power-fail alarm can be silenced using alarm-cancel switch
  • once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power failure and overload conditions
LED Indicators 3 LEDs indicate line power, battery power and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 252
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression

Technology found in select UPS systems that protects against EMI (electromagnetic interference) and RFI (radio frequency interference) line noise and protects equipment against associated incremental hardware damage, data corruption and audio/video transmission problems.

 Yes
PHYSICAL
Installation Form Factors Supported with Included Accessories Tower
Installation Form Factors Supported with Optional Accessories Wallmount (UPSWM – tower mounting kit)
Primary Form Factor Tower
Primary UPS Depth (mm) 178
Primary UPS Height (mm) 216
Primary UPS Width (mm) 132
Shipping Dimensions (hwd / in.) 12.20 x 8.10 x 9.60
Shipping Weight (lbs.) 13.00
UPS Housing Material PVC
UPS Power Module Dimensions (hwd, in.) 8.5 x 5.2 x 7
UPS Power Module Weight (kg) 5.44
UPS Power Module Weight (lbs.) 12
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity Up to 90%, non-condensing
AC Mode BTU / Hr. (Full Load)

The amount of heat a UPS generates when operating under a full load on mains (AC) power. Measured in British Thermal Units (BTU).

 68
AC Mode Efficiency Rating (100% Load) >94%
COMMUNICATIONS
Communications Interface USB (HID enabled)
PowerAlert Software For local monitoring via the UPS’s built-in USB communications port, download PowerAlert Local software at http://www.tripplite.com/poweralert
Communications Cable USB interface cable included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
LINE / BATTERY TRANSFER
Transfer Time

The time it takes for a UPS to switch from AC on-line mode to DC battery-powered mode. Measured in milliseconds (ms)

 2-4 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 99V (adjustable to 83V via potentiometer)
High Voltage Transfer to Battery Power (Setpoint) 176 (adjustable to 147 via potentiometer)
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
CERTIFICATIONS
UPS Certifications
  • Tested to UL1778 (USA)
  • Tested to CSA (Canada)
  • Tested to NOM (Mexico)
  • Meets FCC Part 15 Category B (EMI)
WARRANTY
Product Warranty Period (U.S. & Canada) 2-year limited warranty
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $100,000 Ultimate Lifetime Insurance

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tripp Lite BCPERS450 450VA Standby UPS Tower Battery Backup”

There are no reviews yet.

Related products