04 3550600 052 7036860

Vaddio DocCAM 20 HDBT OneLINK Bridge System

Add to Wishlist

د.إ28,999.00

Add to Wishlist
Key Features
  • 1920 x 1080 60p Camera
  • Single 1/2.8″ Exmor Sensor
  • 20x Optical Zoom
  • Video, Power, Network, and Control
  • Supports Cable Runs up to 328′

Vaddio DocCAM 20 Overview

The DocCAM 20 HDBT OneLINK Bridge System from Vaddio combines the DocCAM 20 HDBT document camera and the OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 1920 x 1080 video at 60p from a single 1/2.8″-type Exmor sensor and transmits it up to 328′ over CAT5e cable. The combination enables powering the camera, sending control signals, and transmitting video over a single Ethernet cable.

Vaddio DocCAM 20 HDBT Ceiling-Mounted Document Camera

The DocCAM 20 HDBT Ceiling-Mounted Camera from Vaddio is a high-definition, recessed in-ceiling document camera with a 1/2.8″ Exmor CMOS sensor, a 20x optical zoom, full HD 1080p/60 fps resolution, and a 59.5° horizontal field of view. The DocCAM 20 HDBT features OneLINK/HDBaseT PoE+ connector. The camera can be controlled via the included IR remote control and has no physical switches. Hardware configuration is done via the web interface. The DocCAM is suitable for video conference calls, training sessions, and online learning courses. It can also be used with the OneLink Bridge AV interface (sold separately) to provide camera power, control and video from the camera to other devices, or it can be powered by any PoE+ third-party devices.

Exmor 1/2.8 type, high-speed, low-noise image sensor for 2.38 megapixels total, full HD (native 1080p/60)
20x optical zoom with horizontal field of view from 60° (wide end) to 3.3° (tele end)
Low-power laser pointer for centering
Superior low-light performance (0.4 lux)
Web interface for remote administration and operation, integration-ready Telnet and serial RS-232 control, presenter friendly IR remote control
Use with a OneLINK HDMI and Bridge devices for power, video, and control

UPC: 840077504724

Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)

The OneLINK Bridge A/V Interface Receiver from Vaddio connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom. This OneLINK Bridge kit simplifies installation by extending power, video, and control to your Vaddio HDBaseT camera over a single Cat5e cable up to 328′.

Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
Connects professional A/V equipment to PC applications via USB 3.0 media stream
Simultaneous uncompressed USB 3.0, HDMI 1.4b, and 3 Gb/s HD-SDI
Two balanced audio inputs and two balanced audio outputs
Control via web interface or Telnet
Status lights
SKU: 999-9968-300 Category: Tag:

Vaddio DocCAM 20 HDBT Ceiling-Mounted Document Camera Specs

Sensor
Sensor 1/2.8″ CMOS
Sensor Resolution 2 MP
Zoom 20x (Optical)
Aperture f/1.6 to 3.5
Frame Rate 60 fps
Output Resolution 1920 x 1080
Minimum Focusing Distance 0.4″ / 10.0 mm
General
I/O Connections 1 x RJ45
I/O Connections 1 x RJ45
Minimum Illumination 0.4 Lux
Signal-to-Noise Ratio 50 dBA
Adjustments
Focal Length 4.7 to 94 mm
Convenience
Focus Modes Auto, Manual
White Balance ATW, Auto, Indoors, Manual, One Push, Outdoors
Electrical
Power Source PoE+
Environmental
Operating Temperature 32 to 104°F / 0 to 40°C
Operating Humidity 20 to 80%
Physical
Dimensions 4.3 x 8.0 x 8.0″ / 10.8 x 20.3 x 20.3 cm
Weight 5 lb / 2.3 kg
Packaging Info
Package Weight 10.25 lb
Box Dimensions (LxWxH) 24 x 14.5 x 10.2″

Vaddio OneLINK Bridge A/V Interface Receiver For HDBaseT Cameras (North America) Specs

Cable Run Max: 328′ / 100 m
Resolution Up to 1080p60 (Full HD)
Connectors 1 x HD-SDI input
1 x HDMI input
2 x Mic/Line audio inputs
1 x USB 3.0, video output with PCM audio
2 x Line audio outputs
1 x OneLINK digital camera interface
1 x Network, IP streaming and control
1 x RS-232, control
1 x Power port
Control Features Web interface for configuration via browser
Telnet API for third-party external control
USB Human Interface Device (HID) for room audio controls
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
Power 48 VDC, 1.36 A
Dimensions 1.7 x 8.4 x 6.0″ / 4.4 x 21.3 x 15.2 cm
Weight 1.7 lb / 0.8 kg
Packaging Info
Package Weight 3.43 lb
Box Dimensions (LxWxH) 12.3 x 9.3 x 3.2″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Vaddio DocCAM 20 HDBT OneLINK Bridge System”

There are no reviews yet.

Related products