AED10,199.00
The Williams Sound IC-2 Interpreter Control Console is ideal for use with Williams Sound FM, IR, and Digi-Wave transmitters. Well suited for both fixed installation and portable applications, the IC-2 gives interpreters a full control set and flexible routing possibilities.
The IC-2 is capable of simultaneous interpretation of one or more languages, and it allows one or two interpreters to monitor floor or relay sources. Interpreters can easily activate microphone inputs, and route the interpretation signal to one of two language groups. The IC-2 is designed to meet international standards for portable interpretation consoles.
| Connections | Floor In: XLR 3-Pin Female, Balanced (or Unbalanced) Input with 24 Kilohms Differential Input Impedance, +19 dBu (Max Balanced)IC-2 Bus In/Out: Cat 5 8p8c RJ45, Distributes Balanced Line-Level Floor and Relay Audio to Another IC-2 XLR Microphone Inputs: 3.5 mm Microphone Inputs: 3.5 mm TRRS Headphone Output: 3.5 mm Headphone Output: Norm Out, Relay Out: |
| Controls | Volume: Left and Right Rotary, Controls Headphone Volume
Bass and Treble Tone: Left and Right Rotary with Center Detent, Controls Headphone Bass and Treble Tone Levels Mute: Push Button, Backlit Red, Mutes Left and Right Mics while Pressed Mic On: Push Button, Backlit Bright Red, Activates Microphone. Right and left Mic On Buttons Are Interlocked; Mic Can Only Be Turned On if the Other Is Off Floor Input, Relay Input: Push Buttons, Backlit Blue, Select Listening Language Group. Listening Modes Are either/or: Turning One On Disables the Other Relay Output: Push Button, Backlit Yellow, Selects Microphone Output Language Group: Light On = Relay Out, Light Off = Norm Out Gain Adjust: Rotary Gain Pots Control Level of Microphone and Floor Audio Phantom Power: Slide Switch Enables 12 VDC Simplex Power to XLR Microphone Norm Feedthrough: Slide Switch Enables Floor Feedthrough to Norm Out XLR Jack Relay Feedthrough: Slide Switch Enables Floor Feedthrough to Relay Out XLR Jack Ground Lift: Slide Switch Disconnects Chassis and Audio Grounds Internal to the Console |
| Frequency Response | 45 Hz to 20 kHz, +0/-3 dB re: 1 kHz with Flat Bass/Treble |
| Crosstalk | > 63 dB @ 1 kHz |
| Tone | Bass: +12 dB Boost or -12 dB Cut at 100 Hz Treble: +12 dB Boost or -12 dB Cut at 10 kHz |
| Signal to Noise Ratio | > 82 dB @ 1 kHz |
| THD & Noise | < 0.5% THD at Full Power |
| Indicators | Peak Level Indicator: Green LED on Back Panel Indicates Optimal Audio Output Level on Norm Out XLR When Blinking Relay Output in Use Indicator: Yellow LED on Front Panel Indicates When Relay Output Is in Use |
| Power | External Power Supply, 18 VDC Desktop Style Switching Inverter, 110-240 VAC, 50/60 Hz, 1 A |
| Dimensions | 10 x 6.35 x 2.45″ / 25.4 x 16.1 x 6.2 cm |
| Weight | 3.4 lb / 1.5 kg |
| Package Weight | 5.7 lb |
| Box Dimensions (LxWxH) | 14.6 x 10.4 x 4″ |
Altinex TNP130 Podcast Tilt 'N Plug Jr for Podcasting and Webinars with Cough Button 
Thor Fiber H-1SDI-QAM-IPLL 1-Channel HD-SDI to QAM Encoder Modulator with Low Latency & IPTV Streamer 
Polsen Omnidirectional USB Gaming and Conferencing Microphone 
04 3550600
052 7036860
There are no reviews yet.