04 3550600 052 7036860

Williams Sound IC-2 Interpreter Control Console (U.S.)

Add to Wishlist
Key Features
  • Ideal for FM, IR, and Digi-Wave
  • Portable or Fixed Operation
  • Supports Multi-Language
  • Simultaneous Interpretation
  • Multi-Interpreter Monitoring

AED10,199.00

Add to Wishlist

Williams Sound IC-2 Overview

TheĀ Williams Sound IC-2 Interpreter Control ConsoleĀ is ideal for use with Williams Sound FM, IR, and Digi-Wave transmitters. Well suited for both fixed installation and portable applications, the IC-2 gives interpreters a full control set and flexible routing possibilities.

The IC-2 is capable of simultaneous interpretation of one or more languages, and it allows one or two interpreters to monitor floor or relay sources. Interpreters can easily activate microphone inputs, and route the interpretation signal to one of two language groups. The IC-2 is designed to meet international standards for portable interpretation consoles.

New Cat 5 audio offers simplified cabling and easy cascading to support additional interpreters.
Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup.
Floor language feed-through
Interlocking microphone and relay output functions
Soft-touch buttons provide for smoother, quieter operation
Individual volume and tone controls ensure optimal listening levels
Easy and lightweight to ship
Enhanced flexibility, providing each interpreter with multiple microphone and headset options
SKU: IC 2 Category:

Williams Sound IC-2Ā Specs

Connections Floor In:
XLR 3-Pin Female, Balanced (or Unbalanced) Input with 24 Kilohms Differential Input Impedance, +19 dBu (Max Balanced)IC-2 Bus In/Out:
Cat 5 8p8c RJ45, Distributes Balanced Line-Level Floor and Relay Audio to Another IC-2

XLR Microphone Inputs:
XLR 3-Pin Female, Balanced (or Unbalanced) Input
Switchable 12 VDC Simplex Power
Variable Gain of 58 dB, 2.4 Kilohms Balanced Input Impedance, +19 dBu (Max Balanced)

3.5 mm Microphone Inputs:
Stereo 3.5 mm TRS Phone Jack
Stereo 3.5 mm TRRS Phone Jack, Unbalanced (R, S) for Electret Condenser Mics
Variable Gain of 40 dB, 3.7 VDC Bias through 2.7 Kilohms

3.5 mm TRRS Headphone Output:
Tip = Left, Ring 1 = Right, Ring 2 = GND, Sleeve = Mic
40 mW Max Power into 32 Ohms Stereo Headset

3.5 mm Headphone Output:
Mono or Stereo Headphone, 8 Ohms Minimum 190 mW Max Power into 32 Ohms Stereo Headset

Norm Out, Relay Out:
3-Pin XLR Male Jack, Balanced, +19 dBu Max into 600 Ohms
Controls Volume: Left and Right Rotary, Controls Headphone Volume

Bass and Treble Tone: Left and Right Rotary with Center Detent, Controls Headphone Bass and Treble Tone Levels

Mute: Push Button, Backlit Red, Mutes Left and Right Mics while Pressed

Mic On: Push Button, Backlit Bright Red, Activates Microphone. Right and left Mic On Buttons Are Interlocked; Mic Can Only Be Turned On if the Other Is Off

Floor Input, Relay Input: Push Buttons, Backlit Blue, Select Listening Language Group. Listening Modes Are either/or: Turning One On Disables the Other

Relay Output: Push Button, Backlit Yellow, Selects Microphone Output Language Group: Light On = Relay Out, Light Off = Norm Out

Gain Adjust: Rotary Gain Pots Control Level of Microphone and Floor Audio

Phantom Power: Slide Switch Enables 12 VDC Simplex Power to XLR Microphone

Norm Feedthrough: Slide Switch Enables Floor Feedthrough to Norm Out XLR Jack

Relay Feedthrough: Slide Switch Enables Floor Feedthrough to Relay Out XLR Jack

Ground Lift: Slide Switch Disconnects Chassis and Audio Grounds Internal to the Console
Frequency Response 45 Hz to 20 kHz, +0/-3 dB re: 1 kHz with Flat Bass/Treble
Crosstalk > 63 dB @ 1 kHz
Tone Bass: +12 dB Boost or -12 dB Cut at 100 Hz
Treble: +12 dB Boost or -12 dB Cut at 10 kHz
Signal to Noise Ratio > 82 dB @ 1 kHz
THD & Noise < 0.5% THD at Full Power
Indicators Peak Level Indicator: Green LED on Back Panel Indicates Optimal Audio Output Level on Norm Out XLR When Blinking
Relay Output in Use Indicator: Yellow LED on Front Panel Indicates When Relay Output Is in Use
Power External Power Supply, 18 VDC Desktop Style Switching Inverter, 110-240 VAC, 50/60 Hz, 1 A
Dimensions 10 x 6.35 x 2.45″ / 25.4 x 16.1 x 6.2 cm
Weight 3.4 lb / 1.5 kg
Packaging Info
Package Weight 5.7 lb
Box Dimensions (LxWxH) 14.6 x 10.4 x 4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Williams Sound IC-2 Interpreter Control Console (U.S.)”

There are no reviews yet.

Related products