Ashly TRA-4150 Rackmount 4-Channel Power Amplifier with Transformer


Key Features
  • 70/100V Transformer, 4- and 8-Ohm Loads
  • 150W per Channel at 4 Ohms
  • 4-Channel Convection-Cooled Operation
  • 80 Hz HPF, Selectable Gain Sensitivity
  • Front-Panel Indicators
  • Euroblock Input Connectors
  • Screw Terminal Outputs

د.إ7,299.00

TheĀ Ashly TRA-4150Ā is a 4-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2-RU metal chassis, offering an output of 80 Watts per channel at 8 Ohms and designed to drive 4- and 8-Ohm loads and transformer-coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.

The TRA-4150 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable high-pass filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and rear-mounted set-and-forget gain controls.

The TRA-4150 is equipped with an internally switchable 120/240V power supply and extensive protection circuitry, along with standard Euroblock inputs and screw terminal outputs.

2-RU rackmount 4-channel power amplifier with 80 Watts per channel power output at 8 Ohms and built-in 60W/70V transformer
Designed to simultaneously drive 4- or 8-Ohm loads and 70/100V transformer-coupled lines
2-stage high-efficiency switched-mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
On-board 80 Hz HPF, selectable gain sensitivity
Up to 8 seconds of turn-on delay with selectable dip switch complement
Comprehensive amplifier protection circuitry includes: output over-current, DC output, main supply rail over-voltage, chassis temperature, inrush limiting, and mains fuse
Front-panel indicators include: overall power, standby, and protect—along with per-channel clip and signal indicators
Euroblock input connectors, screw terminal outputs
SKU: TRA-4150 Category: Tag:
Key Specs
Number of Channels
4
Amplifier Power Rating
8 Ohms:
4x 80 W per Channel
4 Ohms:
4x 150 W per Channel
70 V / 100 V:
4x 150 W per Channel
Analog Audio I/O
4x Block 3-Pin Input
4x Screw Terminal Output
Amplifier Power Rating
8 Ohms:
4x 80 W per Channel
4 Ohms:
4x 150 W per Channel
70 V / 100 V:
4x 150 W per Channel
Amplifier Class
Class-D
Performance
Frequency Response
80 Hz to 20 kHz +1/-3 dB
Damping Factor
> 200 at 8 Ohms
Input Sensitivity
+1 dBu or +4 dBu
Input Impedance
20 Kilohms (Balanced)
Max Gain
36 dB
SNR
> 105 dB
THD
8 Ohms:
< 0.5% (Full Range, at Rated Power -10 dB)
Intermodulation Distortion
< 0.5% (SMPTE, at 8 Ohms)
Connectivity
Analog Audio I/O
4x Block 3-Pin Input
4x Screw Terminal Output
Power
AC Power Connector
IEC / NEMA 5-15
Physical
Cooling
Convection
Dimensions
19.0 x 3.5 x 12.0″ / 48.3 x 8.9 x 30.5Ā cm
Weight
30Ā lb / 13.6Ā kg
Packaging Info
Package Weight
35.05 lb
Box Dimensions (LxWxH)
24.3 x 17.5 x 5.3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ashly TRA-4150 Rackmount 4-Channel Power Amplifier with Transformer”

There are no reviews yet.