04 3550600 052 7036860

Atlona 4K HDMI over HDBaseT 2×1 Switch Wall Plate Extender Kit

Add to Wishlist
  • HDBaseT Wall Plate Switcher
  • 4K/UHD HDMI over HDBaseT Receiver
  • Compact, Low-Profile Enclosure
  • Receiver Supplies Power Remotely
  • Extends A/V and Control up to 330′

6,999.00 د.إ

Add to Wishlist

The 4K HDMI over HDBaseT 2×1 Switch Wall Plate Extender Kit from Altona is a complete integration solution with 4K video extension, automatic switching for the two HDMI inputs, and automatic display control. It includes Altona’s 4K UHD 2×1 HDBaseT Wall Plate Switcher with Dual HDMI Inputs and a 4K/UHD HDMI over HDBaseT Receiver with Ethernet, Control, and PoE. The Wall Plate Switcher features a compact, low-profile enclosure and the receiver remotely powers the transmitter. This kit extends A/V and control up to 330′.

Atlona 4K UHD 2×1 HDBaseT Wall Plate Switcher with Dual HDMI Inputs

The Atlona AT-HDVS-210H-TX-WP is a 2×1 switcher and HDBaseT transmitter with two HDMI inputs. It features a US one-gang, Decora-style wallplate form factor, and includes interchangeable black and white wallplates and faceplates. Video signals up to 4K/UHD with 4:2:0 chroma subsampling, plus embedded audio and control can be transmitted. The HDVS-210H-TX-WP is HDCP 2.2 compliant. It is designed for use with select HDVS Series receivers and scalers, as well as the AT-UHD-EX-100CE-RX-PSE receiver, and Atlona switchers and matrix switchers with HDBaseT inputs. This transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic input selection and display control.

Key Features
  • 2×1 HDBaseTTM switcher with HDMI inputs
  • HDBaseT transmitter for AV, power, and control
  • 4K/UHD capability with 4:2:0 chroma subsampling
  • Remotely powered via PoE
  • Automatic input selection and automatic display control
  • TCP/IP and RS-232 control
All-in-one switcher, controller, and extender
The HDVS-210H-TX-WP combines the benefits of auto-switching, integrated display control, and HDBaseT signal transmission. It also enables input selection, volume, and display on/off control from external RS-232 or TCP/IP commands. The HDVS-210H-TX-WP incorporates many popular integration convenience features while delivering excellent value for classrooms, huddle rooms, and meeting spaces.
Automatic display control
The HDVS-210H-TX-WP provides control to a display through RS-232 or CEC, without the need for a separate control system. This simplifies system design and integration while reducing costs. With automatic display control, the HDVS-210H-TX-WP can trigger a display to power on automatically whenever a laptop or other device is connected. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-210H-TX-WP forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. The HDVS-210H-TX-WP display control capability can also be triggered by an external control system.
Reliable auto-switching
The HDVS-210H-TX-WP automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.
Atlona 4K/UHD HDMI over HDBaseT Receiver with Ethernet, Control, & PoE (328′)

The power sourcing 4K/UHD HDMI over HDBaseT Receiver from Atlona supports AV signals up to 328’over category cable with Ethernet pass-through, RS-232, CEC, and Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60 Hz with 4:2:0 color sub-sampling, plus embedded multi-channel audio and remote 48V power for the transmitter. The receiver is ideal for use with the AT-HDVS-200-TX transmitter (sold separately) for passing 4K signals to a display. It is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter-rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is powered via the included desktop power supply, and provides PoE to the AT-HDVS-200-TX or other PoE-compatible transmitters.

4K/UHD Capability
• Compatible with Ultra High Definition sources and displays
• Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 Compliant
• Adheres to latest specification for High-bandwidth Digital Content Protection
• Allows protected content stream to pass between devices
PSE – Power Sourcing Equipment
• Uses external power supply (included) to power remote PoE-compatible HDVS series transmitters over HDBaseT
• Eliminates the need for the receiver to be powered remotely or by a power-injection device
AV, Ethernet, Power, and Control over HDBaseT
• Receives 4K/UHD video, audio, 100BaseT Ethernet, power, and control through a single cable
• Eliminates multiple cable runs between source, control system, router, and display

Note:

Note: Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX-PSE receiver when used with the UHD-PRO3 Series matrix switchers.
Extended Distance HDMI Extension
• Receives HDMI signals up to 328′ @ 1080p with Cat5e/6 or 4K/UHD using Cat6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends RS-232, CEC, and Ethernet Control Signals
• Control signals travel over HDBaseT link to device for maximum control system flexibility
• Simplifies integration of source, control system, and display

Note:

Note: The AT-UHD-EX-100CE-RX-PSE does not include I/O ports for IR control signals extended over HDBaseT. If IR over HDBaseT is required, please refer to the AT-UHD-EX-100CE-RX.
Rear Panel I/O Connectors
• Placement of ports on rear panel simplifies wire management
• Saves installation time and eliminates clutter
Multi-Channel Audio Compliant
• Supports PCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, DTS-HD Master Audio, DTS:X
• Allows any multi-channel audio stream to be used within a professional audio system
Field Updatable Firmware
• Front panel USB port provides an easy means for kit upgrades
• Ensures long term system return on investment
Front Panel Power and Link Status LEDs
• LED indicators provide power and HDBaseT link status information
• Provides easy setup and troubleshooting
Low-Profile 1″ High Quarter-Rack Enclosure Width
• Easy installation into confined spaces behind displays and above projectors
• Keeps devices out of sight when placed in public spaces
SKU: AT-HDVS-210H-TX-WP-KIT Category: Tag:
General
Device Type
Video/audio/serial extender
Form Factor
In-wall mountable
Color
Black, white
Networking
Connectivity Technology
Wired
Data Link Protocol
RS-232, HDMI, HDBaseT
Max Resolution
4096 x 2160 @ 60 Hz
Max Transfer Distance
328 ft
Features
HDCP compliant, HDBaseT technology
Compliant Standards
HDCP 2.2
Expansion / Connectivity
Interfaces
2 x HDMI (input) – 19 pin HDMI Type A
1 x HDBaseT
1 x RS-232 – terminal block
Miscellaneous
Included Accessories
Faceplate
Compliant Standards
FCC
Dimensions & Weight
Weight
6.35 oz
Environmental Parameters
Min Operating Temperature
32 °F
Max Operating Temperature
122 °F
Humidity Range Operating
20 – 90% (non-condensing)
Packaging Info
Package Weight
0.9 lb
Box Dimensions (LxWxH)
8.7 x 7.3 x 2.9″

Atlona 4K/UHD HDMI over HDBaseT Receiver with Ethernet, Control, & PoE (328′) Specs

Video Resolution
4096 x 2160 @ 24/25/30/50/60 Hz
3840 x 2160 @ 24/25/30/50/60 Hz
2048 x 1080p
1080p @ 23.98/24/25/29.97/30/50/59.94/60 Hz
1080i @ 50/59.94/60Hz
720p @ 50/59.94/60 Hz
576p, 576i, 480p, 480i
VESA
2560 x 2048 / 1600
2048 x 1536
1920 x 1200
1680 x 1050
1600 x 1200 / 900
1440 x 900
1400 x 1050
1366 x 768
1360 x 768
1280 x 1024 / 800 / 768
1152 x 768
1024 x 768
800 x 600
640 x 480
Color Space
YCbCr, RGB
Chroma Subsampling
4:4:4, 4:2:2, 4:2:0
Color Depth
8-bit, 10-bit, 12-bit
Analog Audio Input
Formats:
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Rate
Up to 24-bit
Distance
Cat5e/6 @ 4K: Up to 230′ (70 m)
Cat6a/7 @ 4K: Up to 328′ (100 m)
Cat5e/6 @ 1080p: Up to 328′ (100 m)
HDMI In/Out @ 4K: Up to 15′ (5 m)
HDMI In/Out @ 1080p: Up to 30′ (10 m)
Signal
Bandwidth: 10.2 Gbps
CEC: Pass-through
HDCP: Supports up to 2.2
Certification
Unit: CE, FCC
Power Supply: CE, FCC, RoHS, cULus, RCM, CCC
Temperature
Operating: 32 to 122°F (0 to 50°C)
Storage: -4 to 140°F (-20 to 60°C)
Humidity: 20 to 90%, Non-condensing
Power
Consumption: 15.2 W (When paired with TX)
Supply Input: 100~240 VAC, 50/60 Hz
Supply Output: 48 VDC /0.83 A
Dimensions
Without Rack Ears: 0.9 x 4.3 x 5.0″ (25 x 109 x 127 mm)
With Rack Ears:1.1 x 4.7 x 5.0″ (27 x 119 x 127 mm)
Weight
0.9 lb (0.4 kg)
Packaging Info
Package Weight
2.285 lb
Box Dimensions (LxWxH)
11.15 x 7.4 x 3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Atlona 4K HDMI over HDBaseT 2×1 Switch Wall Plate Extender Kit”

There are no reviews yet.

Related products