04 3550600 052 7036860

Atlona HDBaseT TX/RX for HDMI and USB-C

Add to Wishlist
  • HDBaseT Extender Kit for AV up to 330′
  • 2 x HDMI, 1 x USB-C Switcher
  • 4K/UHD 60 Hz, 4:2:0 Chroma Subsampling
  • Mirrored HDMI Output at Transmitter
  • Selectable 4K to 1080p Downscaling
  • Transmitter Powered by HDBaseT
  • Automatic Input Selection
  • Automatic Display Control

10,399.00 د.إ

Add to Wishlist

Extend your 4K HDMI signal up to 330′ over your HDBaseT network with the Atlona HDBaseT TX/RX for HDMI and USB-C. Featuring advanced functions, this transmitter / receiver kit is ideal for small studios, educational institutions, houses of worship, and even home networks. The included transmitter has an HDMI output that allows you to scale the 4K input to HD for viewing locally on HD monitors, while it simultaneously streams via HDBaseT protocol over your network. The receiver is powered by AC and powers the transmitter via the HDBaseT connection, allowing you to set up your 4K inputs, without having to run an AC power line. Automatic input selection of format and display control simplifies your workflow.

Atlona 4K/UHD HDMI over HDBaseT Receiver with Ethernet, Control, & PoE (328′)

The power sourcing 4K/UHD HDMI over HDBaseT Receiver from Atlona supports AV signals up to 328’over category cable with Ethernet pass-through, RS-232, CEC, and Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60 Hz with 4:2:0 color sub-sampling, plus embedded multi-channel audio and remote 48V power for the transmitter. The receiver is ideal for use with the AT-HDVS-200-TX transmitter (sold separately) for passing 4K signals to a display. It is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter-rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is powered via the included desktop power supply, and provides PoE to the AT-HDVS-200-TX or other PoE-compatible transmitters.

4K/UHD Capability
• Compatible with Ultra High Definition sources and displays
• Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 Compliant
• Adheres to latest specification for High-bandwidth Digital Content Protection
• Allows protected content stream to pass between devices
PSE – Power Sourcing Equipment
• Uses external power supply (included) to power remote PoE-compatible HDVS series transmitters over HDBaseT
• Eliminates the need for the receiver to be powered remotely or by a power-injection device
AV, Ethernet, Power, and Control over HDBaseT
• Receives 4K/UHD video, audio, 100BaseT Ethernet, power, and control through a single cable
• Eliminates multiple cable runs between source, control system, router, and display

Note:

Note: Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX-PSE receiver when used with the UHD-PRO3 Series matrix switchers.
Extended Distance HDMI Extension
• Receives HDMI signals up to 328′ @ 1080p with Cat5e/6 or 4K/UHD using Cat6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends RS-232, CEC, and Ethernet Control Signals
• Control signals travel over HDBaseT link to device for maximum control system flexibility
• Simplifies integration of source, control system, and display

Note:

Note: The AT-UHD-EX-100CE-RX-PSE does not include I/O ports for IR control signals extended over HDBaseT. If IR over HDBaseT is required, please refer to the AT-UHD-EX-100CE-RX.
Rear Panel I/O Connectors
• Placement of ports on rear panel simplifies wire management
• Saves installation time and eliminates clutter
Multi-Channel Audio Compliant
• Supports PCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, DTS-HD Master Audio, DTS:X
• Allows any multi-channel audio stream to be used within a professional audio system
Field Updatable Firmware
• Front panel USB port provides an easy means for kit upgrades
• Ensures long term system return on investment
Front Panel Power and Link Status LEDs
• LED indicators provide power and HDBaseT link status information
• Provides easy setup and troubleshooting
Low-Profile 1″ High Quarter-Rack Enclosure Width
• Easy installation into confined spaces behind displays and above projectors
• Keeps devices out of sight when placed in public spaces
Atlona Omega 4K/UHD 3-Channel HDMI/USB-C Switcher and HDBaseT Transmitter

The Atlona AT-OME-ST31A is a compact yet versatile 3ÿ1 switcher and HDBaseT transmitter with HDMI and USB-C inputs, and mirrored HDMI and HDBaseT outputs. The OME-ST31A conveniently provides automatic source switching and display on/off powering based on input signal detection, such as when a laptop is connected or disconnected. Two simultaneous outputs are included. One is for a local HDMI display, while the other is for extending video over HDBaseT up to 330 feet (100 meters) to a remote location

SKU: AT-OME-ST31A-KIT Category: Tag:
Video Resolution
4096 x 2160 @ 24/25/30/50/60 Hz
3840 x 2160 @ 24/25/30/50/60 Hz
2048 x 1080p
1080p @ 23.98/24/25/29.97/30/50/59.94/60 Hz
1080i @ 50/59.94/60Hz
720p @ 50/59.94/60 Hz
576p, 576i, 480p, 480i
VESA
2560 x 2048 / 1600
2048 x 1536
1920 x 1200
1680 x 1050
1600 x 1200 / 900
1440 x 900
1400 x 1050
1366 x 768
1360 x 768
1280 x 1024 / 800 / 768
1152 x 768
1024 x 768
800 x 600
640 x 480
Color Space
YCbCr, RGB
Chroma Subsampling
4:4:4, 4:2:2, 4:2:0
Color Depth
8-bit, 10-bit, 12-bit
Analog Audio Input
Formats:
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Rate
Up to 24-bit
Distance
Cat5e/6 @ 4K: Up to 230′ (70 m)
Cat6a/7 @ 4K: Up to 328′ (100 m)
Cat5e/6 @ 1080p: Up to 328′ (100 m)
HDMI In/Out @ 4K: Up to 15′ (5 m)
HDMI In/Out @ 1080p: Up to 30′ (10 m)
Signal
Bandwidth: 10.2 Gbps
CEC: Pass-through
HDCP: Supports up to 2.2
Certification
Unit: CE, FCC
Power Supply: CE, FCC, RoHS, cULus, RCM, CCC
Temperature
Operating: 32 to 122°F (0 to 50°C)
Storage: -4 to 140°F (-20 to 60°C)
Humidity: 20 to 90%, Non-condensing
Power
Consumption: 15.2 W (When paired with TX)
Supply Input: 100~240 VAC, 50/60 Hz
Supply Output: 48 VDC /0.83 A
Dimensions
Without Rack Ears: 0.9 x 4.3 x 5.0″ (25 x 109 x 127 mm)
With Rack Ears:1.1 x 4.7 x 5.0″ (27 x 119 x 127 mm)
Weight
0.9 lb (0.4 kg)
Packaging Info
Package Weight
2.285 lb
Box Dimensions (LxWxH)
11.15 x 7.4 x 3″

Atlona Omega 4K/UHD 3-Channel HDMI/USB-C Switcher and HDBaseT Transmitter Specs

Packaging Info
Package Weight
2.83 lb
Box Dimensions (LxWxH)
13.8 x 8.2 x 2.8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Atlona HDBaseT TX/RX for HDMI and USB-C”

There are no reviews yet.

Related products