Blonder Tongue AP-60-860A Three-Mode Agile Processor


Key Features
  • Three Mode Heterodyne Processing
  • Input: Analog RF, QAM, QAM / 8VSB
  • Output: +60 dBmV Analog RF, +55 dBmV QAM
  • EIA-608 Closed Captions
  • EAS Interface
  • 1RU Rackmount Form Factor

د.إ12,999.00

Blonder Tongue AP-860AĀ Overview

TheĀ AP-60-860A Three-Mode Agile ProcessorĀ fromĀ Blonder TongueĀ is a digital and analog heterodyne processor. It features three modes: Analog RF, QAM, and QAM / 8VSB; and can output +60 dBmV analog RF and +55 dBmV QAM. The unit is housed in a rackmount chassis that fits in a 1RU rack space.

  • Accepts one analog RF input: CATV sub-band channels T7-T13, CATV standard channels 2 to 135, VHF channels 2 to 13, and UHF channels 14 to 69; and delivers one Analog RF output: CATV standard channels 2 to 135
  • Accepts one digital off-air 8VSB or digital cable QAM input: CATV standard channels 2 to 135, VHF channels 2 to 13, and UHF channels 14 to 69; and delivers one analog RF output: CATV standard channels 2 to 135
  • Equipped with EAS interface which can also be used as an IF (Intermediate Frequency) input
  • Supports EIA-608 closed captions
Connectors
Input
Connector: 1 x F type female
Analog Mode (Mode 1):
Standard: NTSC
Tuning: CATV: 2 to 135; broadcast: 2 to 69; Sub: T7 to T13
Bandwidth: 6 Mhz
Power Level: -20 to +30 dBmV
QAM Mode (Mode 2):
Standard: ITU-T J.83 – Annex B (64 and 256 QAM) Tuning Range: CATV channels 2 to135; T7 to T13
Data Rate: 38.8 Mbps (QAM 256); 26.97 Mbps (QAM 64)
Bandwidth: 6 MHz
Power Level: –20 to +30 dBmV
QAM / 8VSB Mode (Mode 3):
Standard: 8VSB: ATSC Digital Television A / 53E; QAM: ITU-T J.83 – Annex B (64 and 256 QAM)
Tuning Range: 8VSB: VHF (NTSC channels 2 to 13), UHF (NTSC channels 14 to 69); QAM: CATV channels 2 to 135 / T7 to T13
Data Rate: 8VSB: 19.392 Mbps; QAM: 38.8 MBps (QAM 256), 26.97 Mbps (QAM 64)
Bandwidth: 6 MHz
Power Level: -20 to +30 dBmV
Intermediate Frequency (IF)
Connector: F type female
Input / Output Impedance: 75 ohm
Input Return Loss: 16 dB
Output Return Loss: 15 dB
EAS / ALT IF:
Input Level: +38 dBmV at 45.75 MHz
Switch Isolation: > 60 dB

Standby Carrier: +35 dBmV – RF input < -25 dBmV

Modes 1 and 3
Aural Frequency: 41.25 MHz
Visual Frequency: 45.75 MHz
Composite Loop Output:
Aural Carrier Level: +20 dBmV
Visual Carrier Level: +35 dBmV

Mode 2
Center Frequency: 44 MHz
Output Level: +30 dBmV

Output
Modes 1 and 2
Connector: F type female
Frequency Range: 54 to 864 MHz
Channels: UHF, VHF, CATV (standard, HRC IRC)
Power Level: Mode 1 (analog): +60 dBmV; Mode 2 (QAM): +55 dBmV
Power Level Range: Mode 1 (Analog): +50 to +62 dBmV (in 0.2 dB increments); Mode 2 (QAM): +45 to +57 dBmV (in 0.2 dB increments)
Broadband Noise: Mode 1 (Analog) -77 dBc (at +60 dBmV output level, 4 MHz bandwidth); Mode 2 (QAM) -75 dBc (at +55 dBmV output level, 6 MHz bandwidth)
Spurious: -63 dBc
Impedance: 75 ohm
Return Loss: 15 dB
Aural / Visual Carrier Ratio (Mode 1): -15 dB Ā±2
Frequency Tolerance: Ā±20 kHz; 32 to 122Ā°F (0 to 50Ā°C) Adjacent Channel Rejection: 65 dB

Mode 3
Connector: F type female
Frequency Range: 54 to 864 Mhz
Channels: UHF, VHF, CATV (standard, HRC IRC)
Power Level: +60 dBmV Power Level Range: +50 to +62 dBmV (in 0.2 dB increments)
Broadband Noise: -77 dBc (at +60 dBmV output level, 4 MHz bandwidth)
Spurious: -63 dBc
Impedance: 75 ohm
Return Loss: 15 dB
Aural / Visual Carrier Ratio (Mode 1): -15 dB Ā±2
Visual Frequency Tolerance:
Standard Channels: Ā±20 kHz; 32 to 122Ā°F (0 to 50Ā°C)
FCC Aeronautical Channels: Ā±5 kHz; 32 to 122Ā°F (0 to 50Ā°C)
Video Frequency Response: 1.5 dB peak-to valley (fv-0.5 to fv+4.2 MHz)
Video-to-RMS Hum Ratio: 65 dB
Signal-to-Noise Ratio: 58 dB (weighted)
Differential Gain: 2.0% at 87.5%
Differential Phase: 1.0Ā°
Over-modulation Indicator: 87.5%
Chrominance / Luminance Delay: Per FCC requirements
Audio:
Frequency Response: Ā±1.0 dB
Frequency Range: 50 Hz to 15 kHz
Signal-to-Noise Ratio: 59 dB
Total Harmonic Distortion: 1.0% at 55 kHz deviation
Over-modulation Indicator: 55 kHz Ā±2
4.5 MHz Audio Carrier Tolerance: Ā±150 Hz; 32 to 122Ā°F (0 to 50Ā°C)

General
Alarms / Monitoring / Control
Indicators:
Lock: Green LED
Stereo Audio: Green LED
EAS or Alternative IF Activated: Red LED
Audio Over-modulation: Red LED
Video Over-modulation: Red LED
Local Monitoring:Ā Front-panel, 16-channel, 2-line LCD screen

Local Control:Ā Front-panel, 16-character, 2-line LCD screen; front-panel navigational key-pad; audio and video modulation adjustment; aural carrier adjustment

Power Requirement
110 VAC at 60 Hz – fuse: 1 A, 250 VDC, SloBlo
Power Consumption
36 W maximum
Operating Temperature
32 to 122Ā°F / 0 to 50Ā°C
Storage Temperature
-13 to 158Ā°F / -25 to 70Ā°C
Humidity
0 to 95% RH at 95Ā°F (35Ā°C) maximum, non-condensing
Dimensions
19 x 18.6 x 1.8″ / 483 x 473 x 44 mm
Weight
7 lb / 3.2 kg
Packaging Info
Package Weight
10.3 lb
Box Dimensions (LxWxH)
23.3 x 23.1 x 3.6″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Blonder Tongue AP-60-860A Three-Mode Agile Processor”

There are no reviews yet.