04 3550600 052 7036860

Cisco 1100 Terminal – gateway – rack-mountable

Add to Wishlist

Tech overview

Cisco 1100 Terminal – Gateway – GigE – WAN ports: 2 – rack-mountable

21,399.00 د.إ

Add to Wishlist

The compact, high-density Cisco 1100 Terminal Services Gateway (C1100 TSG) with Cisco IOS XE Software allows secure remote management of a wide variety of networking, compute, Internet of Things (IoT), and other devices. It integrates Layer 2 switching and comprehensive security with the ability to integrate wired and wireless WAN connections (LTE Advanced 3.0) into a single rack unit. The C1100 TSG allows secure authentication (through support for RADIUS or TACACS) of remote users connecting to resources on an internal corporate or private network from Internet-connected devices.

Cloud service providers can deploy the C1100 TSG in data centers to provide secure connectivity to terminal servers, computers, IoT devices, and other networking equipment located in the internal network or behind a firewall. In addition, the gateway supports the Cisco IOS Firewall, IPsec and Network Address Translation (NAT), providing security and protection to all devices that connect to or from the terminal gateway.

SKU: C1100TG-1N32A Category: Tag:
Specifications
General
Device Type Gateway
Enclosure Type Rack-mountable – 1U
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Performance
Aggregate throughput 500 Mbps
Aggregate throughput (IPSec) 100 Mbps
Network / Transport Protocol
IPSec, SLIP, DHCP, PAP, L2TPv3, IPv4, IPv6
Routing Protocol
OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, PIM-SM, IGMPv3, GRE, MPLS, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol
SNMP 2, SNMP 3, SSH, SSH-2, DHCP, TACACS+, LDAP, RADIUS
Encryption Algorithm
DES, Triple DES, MD5, IKE, DH, TLS 1.0, SSL 3.0, SSL 2.0, DSA, 128-bit AES, 192-bit AES, 256-bit AES, IKEv2, 1024-bit RSA, 2048-bit RSA, 256-bit SHA, TLS 1.1, TLS 1.2, 512-bit SHA, ESP, 748-bit RSA, 384-bit SHA, ECDSA 256-bit, ECDSA 384-bit, ECDH
Authentication Method
Kerberos, Secure Shell (SSH), RADIUS, PAP, CHAP, X.509 certificates, TACACS, TACACS+, Secure Shell v.2 (SSH2), LDAP
Features
NAT support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Access Control List (ACL) support, Dynamic Multipoint VPN (DMVPN), Source-Specific Multicast (SSM), Authentication, Authorization and Accounting (AAA), Hierarchical Quality of Service (HQoS), Embedded Event Manager (EEM), Point-to-Point Protocol (PPP)
Compliant Standards
IEEE 802.3, IEEE 802.1Q, X.509, CISPR 22 Class A, CISPR 24, EN55024, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, CS-03, UL 60950-1, IEC 60950-1, EN 60950-1, X.509 v3, HMAC, AS/NZS 3548 Class A, GB 4943, VCCI V-3, EN 61000, GR-1089-CORE, KN22, KN24, GR-63-CORE, CNS 13438, EN 55022 Class A, EN 300 386, EN 62368-1, IEC 62368-1, ANSI T1.101, TIA-968-B, RTTE, ITU-T G.823, ITU-T G.824, CAN/CSA-C22.2 No. 62368-1, CAN/CSA-C22.2 No. 60950-1, UL 62368-1, AS/NZS 62368.1
RAM 2 GB DDR4 SDRAM
Flash Memory 4 GB
Status Indicators
Status
Expansion / Connectivity
Interfaces WAN / LAN: 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45/SFP ¦ Serial: 32 x asynchronous ¦ USB 3.0: 1 x 9 pin USB Type A ¦ USB 2.0: 1 x 4 pin USB Type A ¦ Console: 1 x ¦ AUX: 1 x
Expansion Slots 1 (total) / 1 (free) x NIM
Installed Modules Qty (Max) 0 (installed) / 1 (max)
Power
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Miscellaneous
Included Accessories Faceplate blank cover, 2 blank panels
Rack Mounting Kit Included
MTBF 739,252 hours
Software / System Requirements
OS Provided Cisco IOS IP Base
Dimensions & Weight
Width 17.5 in
Depth 12 in
Height 1.7 in
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 – 85%

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cisco 1100 Terminal – gateway – rack-mountable”

There are no reviews yet.

Related products