Cisco Aironet 2702i Controller-based – wireless access point AIR-CAP2702I-B-K9


Interface Types:Ā Ethernet RJ45

Encryption/SED Supported

Electrical Interface:Ā Ethernet Gigabit – 1Gbps

On-Board Cache:Ā 512MB

Wattage/VA:Ā 15W

د.إ4,099.00

Cisco AIR-CAP2702I-B-K9 Aironet 2700 Series Ap Networking Device

Overview

The Cisco Aironet 2700 series of Wi-Fi access points (APs) delivers industry-leading 802.11ac performance at a price point ideal for plugging capacity and coverage gaps in dense indoor environments. The Aironet 2700 series extends 802.11ac speed and features to a generation of smartphones, tablets, and high-performance laptops now shipping with the faster, 802.11ac Wi-Fi radios.

The Aironet 2700 series supports 802.11ac “Wave 1” in its first implementation, providing a theoretical connection rate of up to 1.3 Gbps. That’s roughly triple the rates offered by today’s high-end 802.11n APs. The boost helps you stay ahead of the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.

Building on the Cisco Aironet heritage of RF excellence, the 2700 series APs run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications.

Cross-AP noise reduction

Cross-AP noise reduction, a Cisco innovation enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.

Optimized AP roaming

Optimized AP roaming ensures that client devices associate with the AP in their coverage range that offers the fastest data rate available.

Cisco ClientLink 3.0 technology

Cisco ClientLink 3.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices.

Cisco CleanAir technology

Cisco CleanAir technology enhanced with 80 MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference.

MIMO equalization

MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.

SKU: AIR-CAP2702I-B-K9 Category: Tags: , ,

Specifications

General
Device Type Wireless access point
Ruggedized Design Indoor
Width 8.7 in
Depth 8.7 in
Height 2 in
Weight 2.2 lbs
Processor / Memory / Storage
RAM 512 MB
Flash Memory 64 MB
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 450 Mbps
Line Coding Format CCK
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Frequency Band 2.4 GHz, 5 GHz
Status Indicators Status
Features Auto-sensing per device, power over Ethernet (PoE), DFS support, Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), ClientLink 2.0 technology, 3T4R MIMO technology, cyclic shift diversity (CSD)
Encryption Algorithm AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Antenna
Antenna Internal
Directivity Omni-directional
Expansion / Connectivity
Interfaces 2 x 1000Base-T – RJ-45Ā 1 x management – RJ-45
Miscellaneous
Compliant Standards VCCI, ICES-003, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN50155, Directive 93/42/EEC, EN 300 328, EN 301 489-1, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EN 301 489-17
Power
Power Over Ethernet (PoE) Supported PoE
Power Consumption Operational 15 Watt
Manufacturer Warranty
Service & Support Limited warranty – advance parts replacement – lifetime – response time: 10 days
Environmental Parameters
Min Operating Temperature 32 Ā°F
Max Operating Temperature 104 Ā°F
Humidity Range Operating 10 – 90% (non-condensing)
General
Depth 8.7 in
Device Type Wireless access point
Height 2 in
Ruggedized Design Indoor
Weight 2.2 lbs
Width 8.7 in
Antenna
Antenna Internal
Directivity Omni-directional
Environmental Parameters
Humidity Range Operating 10 – 90% (non-condensing)
Max Operating Temperature 104 Ā°F
Min Operating Temperature 32 Ā°F
Expansion / Connectivity
Interfaces 2 x 1000Base-T – RJ-45 Ā¦ 1 x management – RJ-45
Manufacturer Warranty
Service & Support Limited warranty – advance parts replacement – lifetime – response time: 10 days
Miscellaneous
Compliant Standards VCCI, ICES-003, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.107, FCC Part 15.109, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, EN50155, Directive 93/42/EEC, EN 300 328, EN 301 489-1, EN 301 893, CAN/CSA-C22.2 No. 60950-1, EN 301 489-17
Networking
Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Connectivity Technology Wireless
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0)
Data Transfer Rate 450 Mbps
Encryption Algorithm AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Features Auto-sensing per device, power over Ethernet (PoE), DFS support, Wi-Fi Multimedia (WMM) support, CleanAir technology, Maximum Ratio Combining (MRC), ClientLink 2.0 technology, 3T4R MIMO technology, cyclic shift diversity (CSD)
Form Factor External
Frequency Band 2.4 GHz, 5 GHz
Line Coding Format CCK
Status Indicators Status
Power
Power Consumption Operational 15 Watt
Power Over Ethernet (PoE) Supported PoE
Processor / Memory / Storage
Flash Memory 64 MB
RAM 512 MB

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cisco Aironet 2702i Controller-based – wireless access point AIR-CAP2702I-B-K9”

There are no reviews yet.