04 3550600 052 7036860

Crown Audio DCi 4/600DA DriveCore Install DA Series 4-Channel Amplifier 600W x 4 with Dante / AES67

Add to Wishlist
Key Features
  • Integrated Dante / AES67 Network Audio
  • Network Configuration, Monitor & Control
  • Continuous Load Monitoring
  • Onboard Digital Signal Processing (DSP)
  • Limiters, Compressor, Delay, EQ, XOver
  • Programmable General Purpose I/O Port
  • 600W per Channel
  • 70V/100V Compatible
  • Bridgeable Channel Pairs
  • Front Panel Indicators

25,599.00 د.إ

Add to Wishlist

TheĀ Crown DCi 4/600DA DriveCore Install DA SeriesĀ is a 4-channel power amplifier with Dante / AES67 networked audio and integrated DSP. The amplifier is capable of producing 600W of output per channel and works with 2-, 4-, 8-, and 16-Ohm speakers or with 70/100Vrms systems. Channels can be bridged for powering higher power applications such as a subwoofer.

The amp’s advanced capabilities and support for Dante Domain Manager makes it well suited for installations that are standardized on Dante for networked audio transport. The Dante / AES67 ports provide primary and secondary connections for redundancy and will accept 48 and 96 kHz digital audio. Analog audio can be sent via Dante / AES67 pre/post processing (at 48 kHz). Network configuration, monitoring, and control are provided with HiQnet protocols over standard TCP/IP network connections. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers. Additionally, a programmable General Purpose Input/Output (GPIO) port can be configured to control volume, recall presets, report errors to a third-party control system, and more.

The integrated DSP provides a comprehensive set of tools and features including LevelMAX limiting for inputs and outputs with thermal limiting, input compression, input & output delay (up to 2 seconds), input & output EQ, crossover settings, and a signal generator. The Crown DCi 4/600DA DriveCore Install DA Series 4-Channel Amplifier ships with four input connectors and a power cord.

General Features
  • Crown’s proprietary and patented DriveCore technology
  • Amplifiers are the next generation of PWM technology using high-quality, Class-D amplifier topologies
  • Minimum Guaranteed Power Ratings: DCi amplifiers deliver the rated power in the specifications for long periods of time
  • Direct Drive “Constant Voltage” capabilities on a channel by channel basis for 70 or 100Vrms amplification without the use of a step-up frequency limiting transformer for higher audio quality
  • HiQnet Audio Architect supported amplifier
  • Advanced PFC universal power supply provides efficiency, and is designed to deliver maximum power no matter where the amplifier is located; Universal AC input accepts 100 to 240 VAC, 50/60 Hz (Ā±10%)
  • DriveCore includes five patents that are also included in Crownā€™s flagship touring amplifier I-Tech HD4, providing versatility and durability
  • TCP/IP based protocol in HiQnet for network monitoring and control
  • Highly effective cooling system focuses airflow on parts that need it most, maximizing efficiency while minimizing heat and noise
  • Integrated Dante / AES67 networked audio simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier
Network monitoring and Control
  • Continuous load monitoring
  • Comprehensive error reporting
  • Pilot tone monitoring
  • Programmable general purpose input/output (GPIO) ports
Digital Signal Processing (DSP)
  • LevelMAX: Limiters for inputs and outputs with thermal limiting
  • Input compressor
  • Input and output delay
  • Input and output EQ
  • Signal generator
  • Crossover
SKU: DCI 4600DA Category: Tag:

Crown Audio DCi 4600Ā Specs

Inputs
3-pin block connectors
Outputs
Terminal strips
Output Power
Dual Mode:
@ 2 Ohms: 300 W (Per Channel)
@ 4 Ohms: 600 W (Per Channel)
@ 8 Ohms: 600 W (Per Channel)
@ 16 Ohms: 300 W (Per Channel)
@ 70 Vrms: 600 W (Per Channel)
@ 100 Vrms: 600 W (Per Channel)

Bridge Mono Mode:
@ 4 Ohms: 600 W
@ 8 Ohms: 1200 W
@ 16 Ohms: 1200 W
@ 140 Vrms: 1200 W
@ 200 Vrms: 1200 W
Voltage Gain
34 dB
Frequency Response
20 Hz to 20 kHz (8 Ohms): Ā±0.25dB
Signal to Noise Ratio
Signal to Noise Ratio (ref. rated power, (8 Ohms, 20 Hz to 20 kHz): > 108 dB
Total Harmonic Distortion
< 0.35% (@ full-rated power, from 20 Hz to 20 kHz)
Intermodulation Distortion
ā‰¤ 0.35% (60 Hz and 7 kHz @ 4:1, from -30 dB to full-rated power)
Damping Factor
> 1000 (20 to 100 Hz)
Crosstalk
> 80 dB (below rated power, 20 Hz to 1 kHz)
CMRR
> 70 dB (20 Hz to 1 kHz, typical)
DC Output Offset
Ā±10 mV (with inputs shorted)
Input Impedance
10 kOhms (nominally balanced)
5 kOhms (nominally unbalanced)
Maximum Input Level
+20 dBu (before compression)
+26 dBu (before clipping)
Required AC Mains
100 to 240 VAC, 50/60 Hz (Ā±10)
Power Connector
15 A IEC
Cooling
Continuously variable-speed forced air, front-to-back airflow
Load Impedance
Stereo/Dual Mode: 2 to 16 Ohms, 70 Vrms, 100 Vrms
Bridged Mono: 4 to 16 Ohms, 140 Vrms, 200 Vrms
Fan Noise Level
45
Dimensions
14.3″ / 36.2 cm
Weight
20.1 lb / 9.1 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Crown Audio DCi 4/600DA DriveCore Install DA Series 4-Channel Amplifier 600W x 4 with Dante / AES67”

There are no reviews yet.

Related products