04 3550600 052 7036860
Awaiting product image
Placeholder

Dell Powervault 220S SCSI Storage Arrays

Add to Wishlist

1,499.00 د.إ

Add to Wishlist

Dell Powervault 220S SCSI Storage Array – 14 Bays, Dual Fans, Dual Power Supplies, Dual Controller Cards – Used

Dell PowerVault 220S systems are reliable, flexible, external SCSI expansion enclosures designed to support multiple Dell storage environments and RAID configurations. Each system offers maximized drive-spindle count, hot-plug hard drives, optional redundant power, redundant cooling, rackmount capability, systems management features, and a modular design for easy upgrades. Most major components, including hard drives and power supply/cooling modules are hot-pluggable and can be removed and replaced easily. The enclosure management module (EMM), split-bus module, and SCSI terminator card are “warm-pluggable.” This means they can be removed or inserted while the power is on, but all I/O activity has ceased.

Uses Dell 9D988 trays / caddies.

SKU: 220S Category: Tags: ,
Weight 32.4 kg

Drives
SCSI hard drives support for up to fourteen 1-inch-by-3.5-inch LVD Ultra 160 and Ultra 320 hot-plug hard drives, at speeds of 10K or 15K rpm.

Bus
Configurations support for any of the following:

  • one 14-device SCSI bus (joined-bus mode)
  • one clustered 13-device SCSI bus (cluster mode)
  • two independent 7-device SCSI buses (split-bus mode)

Back-Panel Connectors
SCSI connector 68-pin shielded P-type SCSI for connection to host

Backplane Board Connectors
Hard drives fourteen 80-pin SCA-2 connectors
Power supply/cooling module 2 high-current connectors
Enclosure management modules (EMM) 210-pin connector
Split-bus module 180-pin connector

Enclosure Modules
EMM 2 warm-pluggable modules
Split-bus module 1 warm-pluggable module with an external slide switch to change between split-bus, joined-bus, and cluster modes
SCSI terminator card 1 warm-pluggable module to the terminate SCSI bus in nonredundant EMM configurations

LED Indicators
Front panel 5 LED status indicators for power, fault, split bus, cluster mode, and over-temperature
Hard-drive carrier 1 single-color activity LED and 1 two-color LED status indicator per drive
EMM 3 LED status indicators for power, fault, and active status
Split-bus module 1 LED indicator for power
Power supply and cooling module 3 LED status indicators for power supply status, power supply fault, and AC status and 2 for cooling module fault

Power Supplies
Wattage 600 W
Heat dissipation 200 W
Voltage 100-240 V rated (actual 85-264 V)
Frequency 50-60 Hz
Amperage 9.4 A at 100 V, 4.6 A at 200 V

Physical
Height 13.26 cm (5.22 inches)
Width 44.58 cm (17.55 inches)
Depth 50.8 cm (20 inches)
Weight

PowerVault 220S

PowerVault 221S

  

32.4 kg (71.5 lb.) maximum redundant configuration with all hard drives installed

42.2 kg (93.0 lb.) maximum redundant configuration with all hard drives installed

Environmental
Temperature:

Operating

Storage

  

10° to 35°C (50° to 95°F)

-40° to 65°C (-40° to 149°F)
Relative humidity

Operating

Storage

  

8% to 80% (noncondensing)

8% to 95% (noncondensing)
Altitude

Operating

  

-16 to 3048 m (-50 to 10,000 ft)
BTU per hour 2750

Available Hard-Drive Power (Per Slot)
Supported hard-drive power consumption up to 1.3 A at +12V
up to 1.5 A at +5V

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Dell Powervault 220S SCSI Storage Arrays”

There are no reviews yet.

Related products