-
×
Smart-Avi IR Emitter 6’ Single LED
1 × 69.00 د.إ -
×
Gigabit Notebook Adapter
1 × 249.00 د.إ
Subtotal: 318.00 د.إ
04 3550600
052 7036860
Hard Disk Drives, SATA, IDE, SAS, SSD, Storage
Fujitsu MAP 36GB 10K U320 68pin SCSI Hard Drive MAP3367NP
Availability:
30 in stock
1,119.00 د.إ
30 in stock
Fujitsu MAP3367NP 36GB SCSI Hard Drive
Capacity: 36GB
Spindle Speed: 10,000RPM
Interface Type: SCSI 68pin / HD68 Female
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 105
Average Seek Time (read/write ms): 4.5 / 5.0
Electrical Interface Speed: SCSI LVD U320 – 320MBps 16-bit
On-Board Cache: 8MB
|
Fujitsu’s new 10,000rpm MAP3xxx series includes models with optimum capacities of 36.7GB, 73.5GB and 147GB. The series is thus ideal for all mainstream SCSI applications, such as enterprise servers, PC servers, workstations, and RAID subsystems, where data integrity and reliability are essential. These new drives offer new performance standards with a maximum internal transfer rate of 107.8MB/s and a fast average seek time of 4.5ms. The series are equipped with an 8MB, multi-segmented data buffer combined with a 32-bit-wide internal data path for faster data access. In addition, the series support Ultra320 SCSI (320MB/s) interface, which boasts new performance and reliability enhancing features, such as data packet protocol, quick arbitration and selection, and signal pre-compensation. The new series also support 2Gb FC-AL2 interface. Concerning reliability, the new series features the industry’s highest MTBF rating 1,200,000 hours. It also incorporates many reliability enhanced features, such as alloy top cover for lower acoustics and an improved SMART detection system.
|
|||
| PHYSICAL SPECIFICATIONS | ||
 |
||
|
||
|
||
| Formatted storage capacity | 36.7 GB | |
|
||
| Form Factor | 3.5-inch x 1-inch high | |
|
||
| Mounting screws | 6#32UNC | |
|
||
| Track capacity (formatted) | 272 KB ~ 479 KB bytes | |
|
||
| Cylinders | 48,000 | |
|
||
| Sectors per track | 533 ~ 936 | |
|
||
| Seek time (track to track) | Read 0.3 / Write 0.5 milliseconds | |
|
||
| Seek time (average) | 4.5/5.0 milliseconds (read/write) | |
|
||
| Seek time (full track) | 10.0/11.0 milliseconds (read/write) | |
|
||
| Average latency time | 2.99 milliseconds | |
|
||
| Rotational speed | 10,025 RPM | |
|
||
| Data Buffer Size | 8 MB | |
|
||
| Recording code | 32/34 MATCHED NPV 2 | |
|
||
| Interface | 68pin WIDE (ULTRA 320) | |
|
||
| Head positioning method | ROTARY VCM | |
|
||
| Spindle start time | 30 seconds typical | |
|
||
| Spindle stop time | 30 seconds typical | |
|
||
| Power requirement Spin up | 33.5W maximum | |
|
||
| Power requirement Idle (ready) | 10.2 W (typical) | |
|
||
| Height | 25.4 millimetres | |
|
||
| Width | 101.6 millimetres | |
|
||
| Depth | 146.0 millimetres | |
|
||
| Weight | 0.75 kg | |
|
||
| Ambient temperature (operating) | 5 to 50 degrees C | |
|
||
| Ambient temperature (non-operating) | -10 to 60 degrees C | |
|
||
| Maximum DE surface temperature (operating) | 55 max deg. C | |
|
||
| Gradient | 15 degrees C per hour | |
|
||
| Relative humidity (operating) | 20 to 80 % RH (non-condensing) | |
|
||
| Relative humidity (non-operating) | 20 to 80 % RH (non-condensing) | |
|
||
| Maximum wet bulb | 29 degrees C (non-condensing) | |
|
||
| Vibration (operating) | 0.3mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz) | |
|
||
| Vibration (non-operating) | 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz) | |
|
||
| Shock (operating) | 65G Max (2ms) | |
|
||
| Shock (non-operating) | 200G Max (2ms) | |
|
||
| Altitude (operating) | 3,000 metres | |
|
||
| Altitude (non-operating) | 12,000 metres | |
|
||
| Acoustic noise (at 1 metre idle) | 3.4 bels | |
|
||
| MTBF (Mean Time Between Failures) | 1,200,000 power on hours | |
|
||
| Component life (years) Design life used to calculate MTBF. NOT Warranty |
5 years | |
|
||
| Unrecoverable errors | 1 per 10^15 bits read | |
|
||
| Seek errors | 10 per 10^8 seeks | |
There are no reviews yet.