NTI XTENDEX VGA Extender with Audio
NTI’s XTENDEX VGA Extender (ST-C5VA-600) extends a VGA monitor up to 183 meters away from a computer using CAT5 cable. Each video extender consists of a local unit connected to a computer or the output of an NTI switch, and a remote unit connected to a monitor or the input of an NTI switch.
NTI XTENDEX VGA Extender
Features
-
Built-in surge protection.
-
Access information from network servers.
-
Use in-house CAT5 phone wiring to locate a monitor remotely.
-
Supports any VGA monitor.
Specifications
Local Unit | Ā |
Host Connection | Ā |
Ā | Supports a PC, SUN, MAC or NTI Switch. |
Ā | Male 15-pin HD connector for computer connection. |
Ā | Optional RS232 support – female 9-pin D connector. |
Ā | Optional stereo audio support – 3.5mm stereo plug. |
Local Access | Ā |
Ā | Crisp and clear 1920×1440 video resolution. |
Ā | Female 15-pin HD connector for local VGA monitor. |
Ā | Optional RS232 support – male 9-pin D connector. |
Ā | Optional stereo audio support – 3.5mm stereo jack. |
Power | Ā |
Ā | 110 or 220 VAC at 50 or 60 Hz via AC adapter. |
Ā
Remote Unit | Ā |
General | Ā |
Ā | Crisp and clear 1024×768 resolution at 183 meters; higher resolution supported at shorter distances. |
Ā | Female 15-pin HD connector. |
Ā | Optional 3.5mm stereo audio connection. |
Ā | Optional male 9-pin D connector for RS232 |
Video Quality Adjustment | Ā |
Ā | Push buttons on the side adjust video quality. |
Ā | Video quality adjustment for different lengths of CAT5 cable is done manually for video-only extender and automatically for audio/video or video/RS232 extender. The setting is automatically saved to the unit. The next time the unit is powered the adjustment will be recalled. |
Power | Ā |
Ā | 110 or 220 VAC at 50 or 60 Hz via AC adapter |
Options
Stereo Audio
Stereo audio can be heard both locally and remotely.
Frequency response: 20 Hz to 20 kHz, +/-1 dB.
Signal-to-Noise Ratio (SNR): 76 dBA.
Total Harmonic Distortion and Noise (THD+N): 0.017%.
Stereo crosstalk: -70 dB.
Input impedance: 10k Ohms.
Line level output; supports multimedia speakers.
Maximum I/O levels: 3.1Vp-p (line level)
RS232 Control
Supports TXD, RXD, DTR, DSR, CTS and RTS.
Baud rate up to 56000.
Support for a touch screen monitor
There are no reviews yet.