The RoboSHOT 20 UHD OneLINK Bridge System from Vaddio combines a white RoboSHOT 20 UHD PTZ camera and OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single Ethernet cable.
The PTZ camera features a 20x total zoom range with 74° angle of view at wide, with a 4.8° angle of view at maximum zoom in. The OneLINK features HDMI, USB 3.0, and HD-SDI video outputs, audio inputs and outputs, and accepts HDBaseT input as well as RS-232 and Ethernet.
Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (White)
This white RoboSHOT 20 UHD Ultra High Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3″-type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.
The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.
Status Indicator LED
- Purple – Boot-up and Standby modes.
- Blue – Normal operation and is a power on, ready condition.
- Blinking blue – The camera has received IR from the remote or other IR source.
- Red – Tally function; shows that the camera is on-air.
- Blinking red – Fault condition.
- Yellow – Firmware update is in progress.
Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)
The OneLINK Bridge A/V Interface Receiver from Vaddio connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom. This OneLINK Bridge kit simplifies installation by extending power, video, and control to your Vaddio HDBaseT camera over a single Cat5e cable up to 328′.
- 3840 x 2160 UHD Resolution
- Single 1/2.3″ Exmor Sensor
- 20x Total Zoom
- Video, Power, Network, and Control
- Supports Cable Runs up to 328′
There are no reviews yet.