04 3550600 052 7036860

ZeeVee ZvPro620i HD Digital Encoder/Modulator with 2-Port HD DIN Input

Add to Wishlist

د.إ14,499.00

Add to Wishlist

ZeeVee ZvPro 620i Overview

The ZvPro620i HD Digital Encoder/Modulator with 2-Port HD DIN Input from ZeeVee lets you convert component and VGA video input signals into digital cable channels and distribute them to an unlimited number of HDTVs over your existing coaxial cabling. This QAM, MPEG2, Encoder/Modulator unit allows you to distribute content up to 1080p to an unlimited number of displays, using the TV’s built in QAM tuner, eliminating the need for cumbersome, expensive set-top-boxes or media players at each display. The powerful, highly intuitive web interface is used for instrumentation and control while the front panel display is used for on-site status and management at a glance. The encoder is particularly useful in restaurants, pubs, & bars, health & fitness clubs, and in conference rooms.

  • Simultaneous QAM/IP stream output with no compromise in performance
  • Full MPEG2 implementation
  • I, P, and B Frames
  • Low latency
  • Full motion estimation with a wide search range
  • Low-stress power system
  • Full system instrumentation and monitoring
  • Official international regulatory approval
  • Forced air cooling for thermal control
  • Powerful, highly intuitive web interface for instrumentation and control
  • On-site or remote management
  • Front Panel Display for on-site status and management at a glance
  • Robust features like set-top-box control and delay-matched audio
  • Easy downloadable firmware updates
  • Future enhancements provided regularly
  • Emergency Alert System (EAS)
SKU: ZVPRO620I-NA Category: Tag:
Video Input
Component Video
2 x DIN connector HDbridge end, RCA connectors for HD source up to 1080p
Computer VGA (Analog)
2 x HD-15 connector, 75 Ohm RGB 0 to 0.7V, separate H and V sync
VGA Resolution
640×480, 720×480, 800×600, 1024×768, 1152×864, 1176×664, 1280×720, 1280×768, 1280×800, 1280×960, 1280×1024, 1360×768, 1440×900 at 60, 70, 72, 75, 85 Hz.
1680×1050 and 1920×1080 at 60 Hz
VGA resolutions are broadcast centered in the best vertical fit into 1920x1080p30 or 1280x720p60
Closed Caption
EIA/CEA-608 captions accepted over composite video input
Audio Input
Digital Audio
4 x Line level input per channel DIN connector HDbridge end, RCA connector or digital SPDIF audio input. 3.5 mm pigtail connector with VGA
Video Encoder
Encoder Video Profile
ISO13818-2 MainProfile @ HighLevel
Traffic Shaping
Variable Bit Rate
Video Encoding
Variable, 10-24 Mbs per channel
Average Encoding Data Rate
18 Mbs per channel
Encoding Latency
Programmable 200 to 400 ms
Color Profile
4:2:0
GOP Size
16
Video, Audio PID
Programmable starting value
Program Information
Programmable program name, EIT
Audio Encoder
Encoder Audio Profile
ATSC A/52, Dolby Digital (AC-3)
Modulator/Upconverter
Supported Modulation Types
QAM 256 and 64 (ITU-T J83 Annex B) Interleaving modes: (64, 2) only
Cable Standard
HRC, IRC or STD
Frequency Range
Up to 2 paired, frequency-agile QAM RF CATV channels 2-135
2 kHz resolution
+/- 30 ppm accuracy
+/- 35 ppm stability
Output Power
+45 dBmV typical
Output Level Adjust
25-45 dBmV in 1 dBmV steps
MER
> 38 dB typical
I/Q Amplitude Imbalance
< 1% typical
Spectral Tilt
< /= 1 dB over 6 MHz typical
Stream Output
Streaming
RJ-45 10/100Mb Ethernet connection
Up to 2 SPTS, one for each encoded video stream
UDP unicast or multicast, IPV4
User programmable destination address / port
Control
Network Interface
10/100 Mb Ethernet via RJ45 connection
IP address via DHCP or set by user
HTML/Javascript served web interface for easy configuration
Telnet connection for CLI scripting
Easy firmware updates
All settings saved in NV storage
General
Power
100-240 VAC 50/60 Hz, 60 W maximum, 18 W Typical IEC 60320-C14
Cooling
Internal cooling fan, front inlet, rear exhaust
Temperature & Humidity
Operating 32 to +113°F (0 to +45°C)/ 10% to 80%, non-condensing
Vibration
NSTA 1A in carton
MTBF
62,000 hours
Compliance
FCC Class A, IEC60065, EN61000 (see manual 70-00031-00), CE, RoHS, RCM C-Tick
Enclosure
Metal
Mounting
Shelf mount flange or rack ears (ordered separately), 1 RU high
Dimensions
8 x 10 x 1.75″ (20.32 x 25.4 x 4.44 cm)
Weight
3.1 lb (1.4 kg)
Packaging Info
Package Weight
5.05 lb
Box Dimensions (LxWxH)
15.2 x 12.3 x 3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ZeeVee ZvPro620i HD Digital Encoder/Modulator with 2-Port HD DIN Input”

There are no reviews yet.

Related products