CE12808A-B01 Huawei CE12800 Series Data Center Switch

Model:	CE12808A-B01 Huawei CE12800 Series Data Center Switch
Detail:	CE12808 AC Bundle1 (AC Assembly Chassis,2MPUA,5SFU08A,4*PAC-2700WA)

165,499.00 د.إ

CE12808A-B01 is CE12808 AC Bundle1 (AC Assembly Chassis, 2*MPUA, 5*SFU08A, 4*PAC-2700WA).

Quick Specs

Figure 1 shows the appearance of CE12808A-B01.

Table 1 shows the Quick Specs.

Product Code	CE12808A-B01
Switching Capacity (Tbit/s)	89/ 516
Forwarding Rate (Mpps)	34,560
Service Slots	8
Switching Fabric Module Slots	6
LPU slots	8 (slot IDs: 01 to 08)
MPU slots	2 (slot IDs: 09 to 10)
CMU slots	2 (slot IDs: 11 to 12)
SFU slots	6 (slot IDs: 13 to 18)
Power slots	8 (slot IDs: PM1 to PM8)
Fan slots	13 (slot IDs: FAN1 to FAN13)

Product Details

Figure 2 shows the front panel of CE12808A-B01.

Note:

①	CE12800 series switches chassis header, showing the following: Product series name: For the CE12808 chassis, the series name is CloudEngine 12800. Huawei Logo PWR, FAN, SFU, and MPU indicators
②	Two CMUs
③	Cable management frame
④	Front ESD jack
⑤	Air intake area for SFUs in the CE12808 chassis
⑥	Power modules
⑦	Two MPUs
⑧	LPU The CE12808 chassis supports eight LPUs.

* In the CE12808 series switches, MPUs, CMUs, and LPUs are horizontally installed at the front of the chassis, and SFUs are vertically installed at the rear of the chassis.

* CE12808A-B01 is CE12808 AC Bundle1 (AC Assembly Chassis, 2*MPUA, 5*SFU08A, 4*PAC-2700WA), the other modules or cards must be purchased separately.

Figure 3 shows the back panel of CE12808A-B01.

Note:

①	Serial number label
②	Rear ESD jack
③	Handle
④	Power distribution unit
⑤	MAC address label
⑥	Fan modules
⑦	SFU
⑧	Two ground points for a dual-hole ground lug, with a yellow grounding label attached

* In the CE12808 series switches, MPUs, CMUs, and LPUs are horizontally installed at the front of the chassis, and SFUs are vertically installed at the rear of the chassis.

* CE12808A-B01 is CE12808 AC Bundle1 (AC Assembly Chassis, 2*MPUA, 5*SFU08A, 4*PAC-2700WA), the other modules or cards must be purchased separately.

The Modules, Cards

Table 2 shows the recommended elements for the CE12808A-B01.

Model	Description
AC power module
PAC-2700WA	2700W AC Power Supply
FE-SFP optical transceiver
eSFP-FE-LX-SM1310	Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC)
eSFP-FE-LX-SM1310	Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC)
S-SFP-FE-LH40-SM1310	Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC)
GE-SFP optical transceiver
eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)
SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)
S-SFP-GE-LH40-SM1550	Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)
10G-SFP+ optical transceiver
SFP-10G-USR	10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)
OMXD30000	Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)
40GE CFP optical transceiver
CFP-40G-LR4	High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC)
CFP-40G-ER4	High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC)
40GE QSFP+ optical transceiver
QSFP-40G-eSR4	40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver)
QSFP-40G-ER4	40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC)
100GE CFP optical transceiver
CFP-100G-SR10	High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO)
CFP-100G-LR4	CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC)
CFP-100G-ER4	High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC)
GE copper transceiver
SFP-1000BaseT	Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)
100GE interface card
CE-L12CF-EG	12-Port-100GE Interface Card(EG,CFP2)
CE-L08CC-EC	8-Port-100G Interface Card(EC,CXP)
10GE interface card
CE-L48XT-EC	Huawei 48-port 100M/1000M/10G Base-T Interface Card(EC,RJ45) CE-L48XT-EC
CE-L48XS-EC	48-Port-10GE Interface Card(EC,SFP+)
40GE interface card
CE-L24LQ-EC1	24-Port-40G Interface Card(EC1,QSFP+)
CE-L12LQ-EF	12-Port-40G Interface Card(EF,QSFP+)
Firewall module
CE-FWA	Huawei CE12800 NGFW Module A CE-FWA, with HW General Security Platform Software
GE interface card
CE-L48GT-ED	48-Port 10/100/1000BASE-T Interface Card(ED,RJ45)
CE-L48GS-ED	48-Port 100/1000BASE-X Interface Card(ED,SFP)

Compare to Similar Items

Table 3 shows the comparison of CE12808A-B00 and CE12804D-B01.

Product Code	CE12808A-B00	CE12804D-B00
Switching Capacity (Tbit/s)	89/ 5161	45/ 258
Forwarding Rate (Mpps)	34,560	17,280
Service Slots	8	4
Switching Fabric Module Slots	6	6
LPU slots	8 (slot IDs: 01 to 08)	4 (slot IDs: 01 to 04)
MPU slots	2 (slot IDs: 09 to 10)	2 (slot IDs: 05 to 06)
CMU slots	2 (slot IDs: 11 to 12)	2 (slot IDs: 07 to 08)
SFU slots	6 (slot IDs: 13 to 18)	6 (slot IDs: 09 to 14)
Power slots	8 (slot IDs: PM1 to PM8)	4 (slot IDs: PM1 to PM4)
Fan slots	13 (slot IDs: FAN1 to FAN13)	9 (slot IDs: FAN1 to FAN9)

Category: Network Switches & Routers

CE12808A-B01 Specifications
Switching Capacity (Tbit/s)	89/ 516
Forwarding Rate (Mpps)	34,560
Service Slots	8
Switching Fabric Module Slots	6
Fabric Architecture	Clos architecture, cell switching, VoQ, and distributed large buffer
Airflow Design	Strict front-to-back
Device Virtualization	Virtual System (VS)
	Cluster Switch System (CSS)2
	Super Virtual Fabric (SVF)3
Network Virtualization	M-LAG
	TRILL
	VxLAN routing and bridging
	EVPN
	QinQ in VXLAN
VM Awareness	Agile Controller
Network Convergence	FCoE
Network Convergence	DCBX, PFC, and ETS
Data Center Interconnect	BGP-EVPN
Data Center Interconnect	Ethernet Virtual Network (EVN) for inter-DC Layer 2 network interconnections
Programmability	OpenFlow
	ENP programming
	OPS programming
	Puppet, Ansible, and OVSDB plug-ins released on open source websites
	Linux container for open source and customization programming
Traffic Analysis	NetStream
Traffic Analysis	Hardware-based sFlow
VLAN	Adding access, trunk, and hybrid interfaces to VLANs
	Default VLAN
	QinQ
	MUX VLAN
	GVRP
MAC Address	Dynamic learning and aging of MAC addresses
	Static, dynamic, and blackhole MAC address entries
	Packet filtering based on source MAC addresses
	MAC address limiting based on ports and VLANs
IP Routing	IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP
	IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+
	IP packet fragmentation and reassembling
IPv6	IPv6 over VXLAN
	IPv6 over IPv4
	IPv6 Neighbor Discovery (ND)
	Path MTU Discovery (PMTU)
	TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast	IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
	IGMP snooping
	IGMP proxy
	Fast leave of multicast member interfaces
	Multicast traffic suppression
	Multicast VLAN
MPLS	Basic MPLS functions
MPLS	MPLS VPN/VPLS/VPLS over GRE
Reliability	Link Aggregation Control Protocol (LACP)
	STP, RSTP, VBST, and MSTP
	BPDU protection, root protection, and loop protection
	Smart Link and multi-instance
	Device Link Detection Protocol (DLDP)
	Ethernet Ring Protection Switching (ERPS, G.8032)
	Hardware-based Bi-directional Forwarding Detection (BFD)
	VRRP, VRRP load balancing, and BFD for VRRP
	BFD for BGP/IS-IS/OSPF/Static route
	In-Service Software Upgrade (ISSU)
	Segment Routing (SR)
QoS	Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information
	Actions include ACL, CAR, and re-marking
	Queue scheduling modes such as PQ, WFQ, and PQ + WRR
	Congestion avoidance mechanisms, including WRED and tail drop
	Traffic shaping
O&M	IEEE 1588v2
	Packet Conservation Algorithm for Internet (iPCA)
	Dynamic Load Balancing (DLB)
	Dynamic Packet Prioritization (DPP)
	Network-wide path detection
	Microsecond-level buffer detection
Configuration and Maintenance	Console, Telnet, and SSH terminals
	Network management protocols, such as SNMPv1/v2c/v3
	File upload and download through FTP and TFTP
	BootROM upgrade and remote upgrade
	Hot patches
	User operation logs
	Zero-Touch Provisioning (ZTP)
Security and Management	802.1x authentication
	RADIUS and HWTACACS authentication for login users
	Command line authority control based on user levels, preventing unauthorized users from using commands
	Defense against MAC address attacks, broadcast storms, and heavy-traffic attacks
	Ping and traceroute
	Remote Network Monitoring (RMON)
Dimensions (W x D x H, mm)	442 x 813 x 752.85 (17 U)
Chassis Weight (empty)	< 150 kg (330 lb)
Operating Voltage	AC: 90V to 290V DC: -38.4V to -72V HVDC: 240V
Max. Power Supply	12,000W

Based on 0 reviews

0.0 overall

Be the first to review “CE12808A-B01 Huawei CE12800 Series Data Center Switch” Cancel reply

There are no reviews yet.