Huawei CE6810-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side exhaust,Without Power Module)

Model:	Huawei CE6810-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side exhaust,Without Power Module)
Detail:	Huawei CE6810-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side exhaust,Without Power Module)

AED26,699.00

CE6810-48S4Q-EI-F is Huawei CE6810-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side exhaust,Without Power Module). Support for Fiber Channel over Ethernet (FCoE) allows a single network to carry storage, data, and computing services, reducing network construction and maintenance costs The industry.

Quick Specs

Figure 1 shows the appearance of CE6810-48S4Q-EI-F.

Table 1 shows the Quick Specs.

Product Code	CE6810-48S4Q-EI-F
Part Number	02350EXU
Software Version	V100R003C00 and later
Fixed GE interfaces	None
Fixed 10GE interfaces	48*10GE SFP+
Fixed 40GE interfaces	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.
Fixed 100GE interfaces	None
Switching Capacity	1.28 Tbit/s
Forwarding Rate	960 Mpps
Rated voltage range(with power module)	100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC
Maximum power consumption	238W
Fan type	Pluggable fan module
Airflow Design	Front-to-back or back-to-front
Dimensions (W x D x H)	442 mm x 600 mm x 43.6 mm
Weight (fully loaded)	10.4 kg (22.9 lb)

Product Details

Figure 2 shows the rear (port side) panel of CE6810-48S4Q-EI-F.

Note:

①	Forty-eight 10GE SFP+ Ethernet optical ports
②	Four 40GE QSFP+ Ethernet optical ports

Figure 3 shows the front (power supply side) panel of CE6810-48S4Q-EI-F.

Note:

①	Power supply slot 1
②	Fan slot 1
③	Console port
④	Bar code label
⑤	Fan slot 2
⑥	Power supply slot 2
⑦	USB port
⑧	ETH management port

The Modules

Table 2 shows the recommended elements for the CE6810-48S4Q-EI-F.

Model	Description
GE-SFP Optical Transceiver
eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)
SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)
S-SFP-GE-LH40-SM1550	Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)
10G-SFP+ Optical Transceiver
SFP-10G-USR	10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)
OMXD30000	Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)
40GE QSFP+ optical transceiver
QSFP-40G-iSR4	40GBase-iSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.15km,MPO)(Connect to four SFP+ Optical Transceiver)
QSFP-40G-LR4	40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC)
GE Copper Transceiver
SFP-1000BaseT	Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)
FAN-40EA
FAN-40EA-F	Fan box(EA,Front to Back,FAN panel side intake)
FAN-40EA-B	Fan box(EA,Back to Front,FAN panel side exhaust)

Compare to Similar Items

Table 3 shows the comparison of CE6810-48S4Q-EI-F, CE6810-LI-F-B0C and CE6810-32T16S4Q-LI-B.

Product Code	CE6810-48S4Q-EI	CE6810-LI-F-B0C	CE6810-32T16S4Q-LI-B
Software Version	V100R003C00 and later	V100R005C10 and later	V100R005C10 and later
Fixed 10GE interfaces	48*10GE SFP+	24*10GE SFP+	3210GBASE-T 1610GE SFP+
Fixed 40GE interfaces	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.	2*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces
Fixed 100GE interfaces	None	None	None
Switching Capacity	1.28 Tbit/s	640 Gbit/s	1.28 Tbit/s
Forwarding Rate	960 Mpps	480 Mpps	960 Mpps
Maximum power consumption	238W	171W	288W

Category: Network Switches & Routers

CE6810-48S4Q-EI-F Specification
10G Base-T Ports	0
SFP+ Ports	48
QSFP+ Ports	4
Switching Capacity	1.28 Tbit/s
Forwarding Rate	960 Mpps
Airflow Design	Front-to-back or back-to-front
Device Virtualization	iStack
Device Virtualization	Super Virtual Fabric (SVF)
Network Virtualization	M-LAG
Network Virtualization	TRILL (CE6810EI)
VM Awareness	Agile Controller
Network Convergence	FCoE
Network Convergence	DCBX, PFC, and ETS
Programmability	OpenFlow
	OPS
	Puppet and OVSDB plugins released on open source websites (CE6810EI)
	Linux container for open source and customization programming
Traffic Analysis	NetStream
Traffic Analysis	sFlow
VLAN	Adding access, trunk, and hybrid interfaces to VLANs
	Default VLAN
	QinQ
	MUX VLAN
	GVRP
ACL	Ingress: 2,250 Egress: 1,000
MAC Address Table	Maximum: 64k
	Dynamic learning and aging of MAC addresses
	Static, dynamic, and blackhole MAC address entries
	Packet filtering based on source MAC addresses
	MAC address limiting based on ports and VLANs
ARP (maximum)	4k
IPv4 FIB (maximum)	16k
IP Routing	IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
IP Routing	IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (CE6810EI)
IPv6 FIB (maximum)	8k
Multicast FIB (maximum)	2k
Multicast	IGMP, PIM-SM, PIM-DM, MSDP, and MBGP (CE6810EI)
	IGMP snooping
	IGMP proxy (CE6810EI)
	Fast leave of multicast member interfaces (CE6810EI)
	Multicast traffic suppression (CE6810EI)
	Multicast VLAN (CE6810EI)
Reliability	LACP
	STP, RSTP, VBST, MSTP
	BPDU protection, root protection, and loop protection
	Smart Link and multi-instance
	DLDP
	ERPS (G.8032)
	VRRP, VRRP load balancing, and BFD for VRRP
	BFD for BGP/IS-IS/OSPF/Static route (CE6810EI)
QoS	Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
	Actions of ACL, CAR, re-marking, and scheduling
	Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
	Congestion avoidance mechanisms, including WRED and tail drop
	Traffic shaping
Configuration and Maintenance	Console, Telnet, and SSH terminals
	Network management protocols, such as SNMPv1/v2c/v3
	File upload and download through FTP and TFTP
	BootROM upgrade and remote upgrade
	802.3az Energy Efficient Ethernet (EEE)
	Hot patches
	User operation logs
	ZTP
Security and Management	802.1x authentication
	Command line authority control based on user levels, preventing unauthorized users from using commands
	DoS, ARP, and ICMP attack defenses
	Port isolation, port security, and sticky MAC
	Binding of the IP address, MAC address, interface number, and VLAN ID
	Authentication methods, including AAA, RADIUS, and HWTACACS
	Remote Network Monitoring (RMON)
Dimensions (W x D x H)	442 mm x 600 mm x 43.6 mm
Weight (fully loaded)	10.4 kg (22.9 lb)
Environmental Parameters	Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage	AC: 90V to 290V DC: -38.4V to -72V
Max. Power Consumption	238W

Based on 0 reviews

0.0 overall

Be the first to review “Huawei CE6810-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side exhaust,Without Power Module)” Cancel reply

There are no reviews yet.