04 3550600 052 7036860

Audio-Technica ATUC-IRDU IR Discussion Unit

Add to Wishlist
Key Features
  • For IR Conference Systems
  • Supports 2-Person Conversation Mode
  • Built-In Speaker
  • XLR Microphone Input
  • Supplies 24V Phantom Power
  • Two Multifunction Buttons with LEDs
  • LED Screen for Volume & Channel Control
  • Dual 3.5mm Headphone Outputs
  • Independent Headphone Volume Controls
  • Powered via Batteries or AC Adapter

د.إ3,699.00

Add to Wishlist

Audio-Technica ATUC-IRDU Overview

The Audio-Technica ATUC-IRDU is an IR discussion unit serving as a portable and flexible communication hub for ATUC-IR conferencing systems in academic institutions, corporate facilities, government buildings, conference spaces, and more. Its two multifunction talk buttons with multicolor LED bars, two 3.5mm headphone output with independent volume controls, and convenient built-in speaker make the ATUC-IRDU ideal for two-person conversation configurations.

Connect a gooseneck microphone (available separately) to the 3-pin XLR mic input, then position the ATUC-IRDU between two persons or place it in front of a chairperson. It can be powered by an AC adapter or via one or two rechargeable batteries for truly portable operation. An LED screen allows easy volume adjustment and channel selection, and other LEDs indicate power, battery, and talk status.

Infrared discussion unit with high-quality audio
Built-in speaker outputs conference audio
Individual automated gain control (AGC), mic gain, and mic EQ via ATUC-IRCU control unit (available separately)
Compatible with standard 3-pin XLR gooseneck microphones
Supplies 24V phantom power
Two multifunction talk buttons with multicolor LED bars
Clear LED display for volume control and channel selection
Rear LED indicates talking state and remaining battery charge
Supports powering via one or two batteries or an AC adapter (batteries and adapter available separately)
Supports ATUC-M microphones (M32L, M43H, and M58H models) and their LED rings
SKU: ATUC-IRDU Category:

Audio-Technica ATUC-IRDU Specs

Modulation Method FM
Frequency Bandwidth 1 to 10 MHz
Wavelength 870 nm
Operating Distance Up to 19.7′ / 6 m
Number of Channels Voice: 10
Monitor: 4
Inputs 1 x 3-Pin XLR Female Microphone Input (Balanced)
Outputs 2 x 1/8″ / 3.5 mm TRS Headphone Outputs (Unbalanced)
Phantom Power 24 VDC
Gain Range 7 to 47 dB
Minimum Input Level -60 dBu
Nominal Input Level -40 dBu
Maximum Input Level -20 dBu
Nominal Output Level Headphone Outputs: 1.5 mW
Built-In Speaker: 50 mW
Maximum Output Level Headphone Outputs: 15 mW
Built-In Speaker: 100 mW
Load Impedance Mic Input: 5 kOhms
Headphone Output: 32 Ohms
Built-In Speaker: 8 Ohms
Frequency Response 200 Hz to 5 kHz (+1 dB / -2 dB, +4 dBu Output at 1 kHz)
Headroom 7 dB
Total Harmonic Distortion (THD) <1%, 1 kHz Unity
Dynamic Range 65 dBA
Signal-to-Noise Ratio 58 dBA
Equivalent Input Noise < -80 dBu at 150 Ohms
Operating Temperature 32 to 104°F / 0 to 40°C
Operating Humidity 25 to 85%
Battery 2 x LI-240a Lithium-Ion Batteries (Available Separately)
Battery Life One Battery: Up to 6 Hours 40 Minutes (Transmitting:Receiving = 1:4)
Two Batteries: Up to 13 Hours 20 Minutes (Transmitting:Receiving = 1:4)
Power Supply 12 VDC, 1 A
Power Consumption 4 W
Dimensions 7.4 x 5.9 x 2.8″ / 18.9 x 15.0 x 7.1 cm
Weight 1.8 lb / 0.8 kg (with Batteries)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Audio-Technica ATUC-IRDU IR Discussion Unit”

There are no reviews yet.

Related products