04 3550600 052 7036860

Pyle Pro PDWM1988B Wireless Combo Microphone System (579.1 to 594.1 MHz)

Add to Wishlist

299.00 د.إ

Add to Wishlist
Key Features
  • For Presenters, Performers & Instructors
  • Lavalier Mic and Headset Mic
  • Bodypack Transmitter
  • Tabletop USB-Powered Receiver

Pyle Pro PDWM1988B Overview

The Pyle Pro PDWM1988B is a wireless combo microphone system offering a simple, budget-friendly solution for hands-free miking of a subject in house of worship, office, and business applications such as sermons, interviews, and presentations.

The PDWM1988B comes with a tabletop receiver, a bodypack transmitter, a headset microphone, and a lavalier microphone. For presenters, public speakers, hosts, preachers, and more, you can swap between the headworn headset mic and the clip-on lavalier mic according to the preference of the subject and the sound technician.

The receiver’s volume control, balanced XLR output, and unbalanced 1/4″ output allow easy level adjustments and proper hookup to the input of a PA speaker or a professional mixing console. The receiver is powered by a USB connection, while the microphone runs on AA batteries.

Headset and Lavalier Microphones

The PDWM1988B comes with a headset microphone and a lavalier mic. Use the headset mic for fitness instructors, dancer-singers, presenters, and preachers. The lavalier mic is ideal for situations where visual discreetness is preferred and when the subjects don’t want to wear a mic on their head. No matter which mic you use, the unbalanced 3.5mm TS connection to the bodypack transmitter is the same.

Bodypack Transmitter

The bodypack transmitter features a belt clip for easy attachment to your subject. The LCD screen shows battery status, signal strength, and channel/frequency information at a glance. The transmitter is powered via two included AA batteries, which can be changed quickly thanks to the battery compartment’s flip-down panel.

Tabletop Receiver

The compact tabletop receiver offers simple operations with a mic volume control, a power switch, a digital LCD screen, and convenient powering via USB.

With a balanced XLR output and an unbalanced 1/4″ output on the receiver, routing audio to a mixing console or PA system is straightforward. The receiver features two external rear-mount antennas for extended range.

System Features

  • Operates in the UHF spectrum (from 579.1 to 594.1 MHz) away from Wi-Fi and Bluetooth interference
  • Supports a maximum range of 165′
  • 16 selectable channels accessible via a dedicated frequency-change button on each transmitter
  • Integrated low-noise circuitry
  • Includes two AA batteries to power the bodypack transmitter
  • Includes a USB cable for powering the receiver
  • Includes a 1/4″ TS cable for connecting the receiver to a mixer or PA system
SKU: PDWM1988B Category: Tag:

Pyle Pro PDWM1988B Specs

System
Wireless Transmission Analog UHF
Number of RF Channels 16
Included Transmitters 1 x Bodypack with Microphone
Diversity Antenna Diversity
RF Frequency Band 579.1 to 594.1 MHz
RF Bandwidth Up to 15 MHz
Frequency Step Size 500 kHz
RF Channel Scanning Manual
Max Operating Range 165′ / 50.3 m
Max Systems per Setup 5
Encryption None
Receiver
Form Factor Tabletop
Mounting Options Tabletop
Antenna 2 x 1/4 Wave External, Fixed (Rear-Mount)
Number of Audio Channels 1
Audio I/O 1 x XLR 3-Pin Male Balanced Output
1 x 1/4″ TS Female Unbalanced Output
Frequency Response 30 Hz to 20 kHz (Dependent on Mic)
Network I/O None
Word Clock I/O None
USB/Lightning Connectivity 1 x Micro-USB (Bus Power)
Impedance XLR Output:
600 Ohms (Balanced)
1/4″ Output:
600 Ohms (Unbalanced)
Approximate RF Sensitivity -96 dBm
Spurious Rejection: >70 dB
Power Requirements Bus Power (USB)
Display & Indicators 1 x LCD (AF Level, Channel, Frequency, Power, RF Level)
Housing ABS
Dimensions 8.1 x 1.7 x 7″ / 20.6 x 4.3 x 17.8 cm
Transmitter 1
Transmitter
Form Factor Bodypack
RF Output Power 10 mW
Audio I/O 1 x 1/8″ / 3.5 mm TS Female Unbalanced Input
Plug-In Power 3 V
Pad None
Muting None
Auto-Level Control No
Signal Processing None
Frequency Response 30 Hz to 20 kHz (Dependent on Mic)
Sync Method Manual
Antenna 1 x 1/4 Wave External, Fixed
Approximate RF Sensitivity -96 dBm
Power Requirements Battery
Battery Type 2 x AA (Included)
USB/Lightning Connectivity None
Display & Indicators 1 x LCD (Battery Status, Channel)
Housing ABS
Dimensions 2.5 x 3.9 x 0.9″ / 6.3 x 9.9 x 2.3 cm
Microphone
Form Factor Headset
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced
Microphone 2
Form Factor Lavalier
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Pyle Pro PDWM1988B Wireless Combo Microphone System (579.1 to 594.1 MHz)”

There are no reviews yet.

Related products